User Manual

11-2
k Memory Information Screen
The memory information screen shows information about one memory at a time: the
calculator’s main memory or storage memory.
• Since the fx-7400G
III has only main memory, main
memory contents only appear on the main memory
information screen.
• With the fx-9860G
III or fx-9750GIII, perform one of the following MEMORY mode menu
operations to display the memory information screen you want.
When this memory information screen is displayed: Press this key:
Main memory
1(MAIN)
Storage memory
2(SMEM)
• Use the cursor f and c keys to move the highlighting and check the number of bytes
used by each type of data.
• Line 7 shows how many bytes of memory are currently unused in the currently selected
memory (main or storage).
•
On the main memory screen, < > indicates a data group. On the storage memory screen, [ ]
indicates folders.
• If the name of a file transferred to storage memory from your computer or other source
has a file name that is more than eight characters long, its name will abbreviated to
eight characters when displayed on the storage memory information screen (Example:
AAAABBBBCC.txt > AAAABB~1.txt). Also, if a file name extension has more than three
characters, everything after the third character of the file name extension will be trimmed off.
•
When storage memory folder contents are displayed, the applicable path will be shown in
brackets ([ ]) in the top line.
Moving the highlighting to a data group or folder and pressing w will display the data group
or folder contents. Pressing J will return to the previous screen.