User Manual

13-10
Sending unit
To set up the calculator to send data, press 1(TRAN) while the data communication main
menu is displayed.
This displays a screen for specifying the data selection method.
• { SEL } ... {selects new data}
• { CRNT } ... {automatically selects previously selected data*
1
}
*
1
The previously selected data memory is cleared whenever you change to another mode.
u To send selected data items (Example: To send user data)
Press 1(SEL) or 2(CRNT) to display a data item selection screen.
• { SEL } ... {selects data item where cursor is located}
• { ALL } ... {selects all data}
• { TRAN } ... {sends selected data items}
Use the f and c cursor keys to move the cursor to the data item you want to select and
press 1(SEL) to select it. Currently selected data items are marked with “
 ”. Pressing
6(TRAN) sends all the selected data items.
• To deselect a data item, move the cursor to it and press 1(SEL) again.
Only items that contain data appear on the data item selection screen. If there are too many
data items to fit on a single screen, the list scrolls when you move the cursor to the bottom line
of the items on the screen.
u To execute a send operation
After selecting the data items to send, press 6(TRAN). A message appears to confirm that
you want to execute the send operation.
• 1(Yes) ... sends data
• 6(No) ... returns to data selection screen
Press 1(Yes) to send the data.
• You can interrupt a data operation at any time by pressing A.