E Screen Receiver for fx-CG Series ClassPad 330 PLUS ClassPad II (for Windows®, for Macintosh) User’s Guide CASIO Worldwide Education Website http://edu.casio.com CASIO EDUCATIONAL FORUM http://edu.casio.
Getting Started k About Screen Receiver • Screen Receiver provides the following functions.
k System Requirements Windows Operating Systems: Windows XP Home Edition, Windows XP Professional (32-bit), Windows Vista ® (32bit), Windows 7 (32-bit/64-bit), Windows 8 (32-bit/64-bit) Your hardware configuration needs higher than functionalities that operating system recommends. Computer: Computer with one of the Windows operating systems pre-installed (Excluding computers with an upgraded operating system and self-built computers.
Contents 1. Installing and Uninstalling Screen Receiver ........................................... 4 2. Screen Configuration ................................................................................ 6 Menu Bar ............................................................................................................................9 Status Bar .........................................................................................................................13 3. Using Screen Receiver .......
1. Installing and Uninstalling Screen Receiver This section explains how to install and uninstall Screen Receiver. To install Screen Receiver Note • Do not install Screen Receiver into a folder that is used by other software. 1. Place the CD-ROM into your computer’s CD-ROM drive. • After a short while, the Utility CD screen will appear on the display. 2. Click “Screen Receiver”. 3. Click “Install”. Perform operations as instructed by the text that appears on the screen. 4.
To uninstall Screen Receiver Windows 1. Display the Windows Control Panel. 2. Click [Add/Remove Program]. 3. On the list of applications that appears, select “Screen Receiver”. 4. Click the [Add/Remove] button. • This will display the program maintenance wizard. 5. Click the [Yes] button. • This completes the uninstall operation. Mac OS 1. Move Screen Receiver(.app) to the Trash folder. 2. From the menu, select [Finder] and then [Empty Trash]. To start up Screen Receiver 1.
2. Screen Configuration The following shows the Screen Receiver screen.
k When connected to ClassPad 330 PLUS Windows Mac OS E-7
k When connected to ClassPad II Windows Mac OS E-8
Menu Bar • This section explains the Screen Receiver menu bar. • If a menu command can also be executed by clicking a toolbar button, the applicable toolbar button is also provided. k File Menu Menu Toolbar Button Description Close Closes the active captured data window. Capture Screen Captures the calculator screen. Each capture adds a capture screen to the captured data area. Save Saves the contents of the active data capture window, overwriting the existing data.
k Edit Menu Menu Toolbar Button Description Copies the contents of the active captured data window to the clipboard. Copy k Screen Receive Menu Menu Toolbar Button Description Start Establishes a connection between Screen Receiver and calculator and displays the calculator screen contents. Stop Terminates the connection between Screen Receiver and the calculator.
k View Menu Menu Submenu Toolbar Button Description Reduce Reduces the size of contents of the active captured data window. Expand Expands the size of the contents of the active captured data window. Zoom ×1 Displays the contents of the active captured data window in its actual size. ×2 Displays the contents of the active captured data window as 2X its actual size. ×3 Displays the contents of the active captured data window as 3X its actual size.
k Window Menu Captured data Menu Description Cascade Stacks captured data windows. Tile Horizontal*1 Lines up captured data windows horizontally. Tile Vertical*1 Lines up captured data windows vertically. Arrange Icons Displays captured data windows as icons. Close All Closes the all captured data windows. (Captured data) Shows the names of the displayed captured data.
k Help Menu Menu Description Manual Displays the Screen Receiver User’s Guide. License Displays the end user license agreement. About*1 Displays version information. *1 Mac OS: On the [Screen Receiver] menu, selected [About Screen Receiver]. Status Bar 1 2 1 Help text is displayed here (Windows only).
3. Using Screen Receiver 3-1 Establishing a Connection between Screen Receiver and a Calcualtor Important! • Do not connect the calculator to the computer before starting up Screen Receiver. Start up Screen Receiver first. 1. Start up Screen Receiver. 2. Use the USB cable that comes with the calculator to connect it to your computer. • This will display the dialog box shown below. fx-CG Series ClassPad 330 PLUS ClassPad II 3. fx-CG Series: For Windows Vista, Windows 7, Windows 8 user: press 2.
• USB Connection Precautions A USB connection between the calculator and a computer may be terminated automatically if the computer enters a power save mode, sleep mode, or any other standby state. If this happens, disconnect and then reconnect the USB cable. • Windows XP Users If this is the first time you are connecting the calculator to your computer, use the following procedure to install the USB driver. 3-1.
3-3. Though a message appears to let you know that the software has not passed the “Windows Logo Test”, there is no need for concern. Simply click [Continue Anyway] and proceed with installation. 3-4. Click [Finish]. 4. fx-CG Series: Press J. ClassPad 330 PLUS/ClassPad II: Tap [OK]. • This automatically establishes a connection between Screen Receiver and the calculator, and displays the calculator screen on the Screen Receiver window.
3-2 Calculation Operation Precaution • The way figures are drawn and the cursor moves on the Screen Receiver screen may not exactly match what appears on the calculator screen. • Attention Windows Vista, Windows 7 and Windows 8 users The calculator does not support the operations below while there is a connection between the calculator and Screen Receiver.
3-4 Making a Captured Data Window Active Clicking a captured data window makes it the active window. Active captured data Note • Only one captured data window can be active at any time. • To zoom, copy, save, or print the contents of a captured data window, you first must make it the active window. 3-5 Copying Captured Data Window Contents to the Clipboard 1. Make the captured data window that contains the data you want to copy the active window. 2. Click to copy the captured data to the clipboard.
3-7 Auto File Save Attempting to exit Screen Receiver while there is unsaved captured data will cause the dialog box shown below to appear. 1 2 1 Specifies the file format for the saved file. You can select bmp, jpg, or png. 2 If there is already a file with the same name that you specify, this option specifies whether or not the older version should be overwritten with the new one. 3-8 Resizing a Screen Image To resize the calculator screen Right-click the calculator screen.
To resize the calculator screen when capturing it On the toolbar, click the down arrow button of the zoom box. On the menu that appears, select a zoom factor. Zoom menu To resize captured data Make the window that contains the captured data you want to resize the active window, and then click or . You can select one of three sizes. → ← → ← You also can resize by selecting a zoom factor with the [Zoom] command on the [View] menu.
3-9 Using a Floating Calculator Screen (Windows only) You can display the calculator screen in its own window that is separate from the Screen Receiver window. To make the calculator screen a floating screen 1. Double-click the calculator screen. 2. Drag the calculator screen to the location you want, either inside or outside of the Screen Receiver window. To return a floating calculator screen to the Screen Receiver window - Double-click the floating calculator screen.
3-10 Printing • You can print the contents of a captured data window, if you want. 1. Make the captured data window that contains the data you want to print the active window. 2. Click . This will display the Print dialog box. 3. Click [OK] to start printing. Important! • Only the contents of the currently active captured data window can be printed. You cannot print the contents of multiple captured data windows with a single print operation.
k Print Preview (Windows only) • Click to display the print preview window. 1 2 3 4 1 Displays the Print dialog box. 2 Enlarges the preview image. 3 Reduces the size of the preview image. 4 Closes the print preview window image. k Print Setup Dialog Box • Selecting [Print Setup] on the [File] menu displays the Print Setup dialog box.
3-11 Shortcut Menu On the calculator screen or captured data window, right-clicking with your mouse (Windows) or performing a control+click (Mac OS) will cause the shortcut menu shown below to appear.
4. Tool Options Dialog Box 4-1 File Save Settings 1 2 1 File name extension of captured data files 2 Storage folder 4-2 Capture Settings 1 2 1 Specifies unframed captured screen images 2 Specifies framed captured screen images, and frame thickness.
5. Error Message Table Message Description Required Action A problem occurred while writing file . The disk being written to may be damaged or may not exist. Check the disk and try again. A problem occurred while writing to a disk. Check the disk for data corruption and confirm that the disk exists. Then try again. A problem occurred while launching the manual (***.pdf) viewer. Download the viewer from the site below and reinstall it. http://get.adobe.
Message The image could not be sent from the calculator. (1) Try pressing a key on the calculator. (2) Check to make sure that the calculator is in the Screen Receiver Mode. If the screen is not sent after you perform the above steps, disconnect the USB cable and check the calculator setup. Next, reconnect and try again. For details, select the following on the menu bar: Help - Manual, or refer to the Screen Receiver user’s guide. The connection has been broken for some reason and is being restored.
CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan SA1302-A © 2013 CASIO COMPUTER CO., LTD.
