Calculator User Manual

CASIO

13-1

Chapter 13 Data Communication

This chapter explains how to transfer data between a calculator and a computer, or between

two calculators. Data communication operations are performed in the Link mode.

From the Main Menu, enter the Link mode. The following data communication main menu

appears on the display.

• { TRANSMIT } ... {displays the data send screen}

• { RECV } ... {displays the data receive screen}

• { CABLE } ... {displays the cable type selection screen}

• { WAKEUP } ... {displays the wakeup setting screen}

• { CAPTURE } ... {displays the screen image capture setting

screen}

Communication parameters are fixed at the following settings.

• 3-pin serial port

• Speed ( BPS): 9600 bps max. (Connected with CFX-9850G series or fx-7400G series

calculator)

115200 bps max. (Connected with another fx-CG10, fx-CG20, fx-9860G

SD, fx-9860G II , fx-9860G AU PLUS, fx-9750G II , fx-7400G II , fx-9860G Slim

(OS 1.11), fx-9860G SD (OS 2.00), fx-9860G (OS 2.00) or fx-9860G AU (OS

2.00) calculator)

• Parity (PARITY): NONE

• USB port

• Communication speed is in accordance with USB standards.

k Configuring the Receiver’s Wakeup Feature

When Wakeup is turned on the receiver, the receiver turns on automatically when data transfer

starts.

• When communicating between two calculators (3PIN selected as the cable type), the

receiver enters the receive mode automatically after it wakes up.

• When communication is with a computer (USB selected as the cable type), connecting the

USB cable to a computer and then to the calculator (while the calculator is turned off) will

cause the calculator to turn on and the “Select Connection Mode” dialog box to appear.