User Manual

18-7
Note
• Inverse calculations can be executed when either of the conditions below exists.
- When the Tail setting is {
} (X≤) or { } (X≥)
- When the Tail setting is {
} (≤X≤) for normal distribution (Normal distribution only)
• Inverse calculation cannot be executed for discrete distribution when the Tail setting is
{
} (X=).
• If you have selected the Tail setting that does not allow
execution of inverse calculation, pressing K in step 2 of
the procedure under “Inverse Calculation Operation
Example” displays “VIEW” for the 1 function menu item
instead of “EDIT”. Pressing K1(VIEW) displays a value
details dialog box.
u Re-calculation Operation Example
Calculate the cumulative probability of a normal distribution
using the parameter settings shown to the right. Next,
change data value
x from 36 to 37.5, and then re-calculate
cumulative probability.
1. On the distribution selection screen, highlight “Normal” and then press w.
• Next, perform the key operation below.
2. 1(
) c
dgwcwdfw
1(EXE)
3. dh.fw
Input x value
Re-calculated
p value