User Manual

18-8
u Inverse Calculation Operation Example
Continuing from the “Re-calculation Operation Example” above, change the cumulative
probability obtained as the calculation result (
p = 0.8943502263) to 0.8 and then perform
inverse calculation of data value x.
1. Press e or d.
• This moves the highlighting to
p. Next, perform the key
operation below.
2. a.iw
Re-calculated x value
Input
p value
k Changing Tail Settings on the Graph Screen
You can change the Tail setting even while the graph screen is displayed. To do so, press
K, and then press one of the following function keys: 2( ), 3( ), 4( ),
5( ). Note that 5 can be used for discrete distribution only.
k Changing the Graph Draw Color
You can use the procedure below to change the graph draw color of each distribution type.
1. Press !f(FORMAT).
• While performing an operation on the distribution selection screen, highlight the
distribution type whose graph draw color you want to change, and then press
!f(FORMAT).
2. Use the dialog box that appears to select a graph draw
color.
• Use the cursor keys to move the highlighting to the color
you want, and then press w. You also can select an
option by pressing the number key that corresponds to
the number to the left of the desired option.
Distribution selection screen Parameter input screen Graph screen