User Manual

EN-26
Configuring Settings to Suit Particular Music and
Performance Venues (Scene)
Your Digital Piano comes with 15 different setups,
called “Preset Scene”, each of which suits a particular
song and/or venue. You can instantly change the
Digital Piano setup by selecting a scene.
• You can also save up to 10 of your own setup as
“User Scene”.
• For information about preset scenes, see the “Scene
List” (page A-4).
1. While the home screen (page EN-8) is
displayed, press the ENTER button.
• Enter the Scene mode.
• If the Digital Piano enters the Scene mode after you
turn it on, the scene list screen will appear.
• If you entered the Scene mode after you turned on the
Digital Piano, the scene that was selected the last time
you exited the Scene mode will be displayed first.
2. Use the q and w arrow buttons to select a
scene name.
• Holding down the q (+) or w (–) arrow button
scrolls the scene names at high speed.
• To jump to the default scene (Number 15), press the
q and w arrow buttons at the same time.
3. Press the ENTER button to apply the
currently selected scene.
• If you want to back step to the previous screen
without applying the scene, press the EXIT button.
• While the screen that appears after you apply a scene
is displayed, you can jump to the default scene
(Number 15) by holding down the ENTER button
until the scene name changes.
You can use the steps below to play back a few
measures of the currently selected scene to see if it is
what you want.
1. Select a scene and then press the /k
button.
2. To stop ongoing scene playback, press the
/k button again.
• To start playback from the beginning of the song,
press the u button.
• Exiting the Scene mode causes scene song play to
stop.
Recalling a Scene
EXIT
u, q, w, i
ENTER
SETTING
/k
Scene name
Checking the Sound of a
Scene (Scene Song)
Scene number
Scene song name
Scene name