User Manual

Recording and Playback
EN-39
English
You can listen to playback of the track you recorded as
you record to the other track.
PREPARATION
• Select the tone and effects (Track 1 only) you want to
use in your recording.
Tone (page EN-10)
Effects (page EN-15)
1. Hold down the REC button until the setting
screen shown below appears.
2. Use the q and w arrow buttons to select
“Recorded Part”.
3. Use the u and i arrow buttons to enable
(Play) or disable (Mute) of the recorded track.
4. Press the REC button.
• “Rec Wait...” appears on the display indicating
record standby.
5. Use the u and i arrow buttons to select
“MIDI REC”.
• If you want the metronome to sound while you are
recording, configure the beat and tempo settings, and
then press the METRONOME button. See “Using the
Metronome” on page EN-21 for more information.
6. Use the REC button to select a track for
recording.
• L: Track 1
R: Track 2
• “L” and “R” indicate status information about the left
and right tracks as described below.
– If you selected “Play” in step 3, above:
Flashing: Track to be recorded.
Lit: Track to be played back.
– If you selected “Mute” in step 3, above:
Flashing: Track to be recorded.
Unlit: Track to be muted.
7. Press the /k button or play something on
the keyboard.
• This will start both playback of the recorded track
and recording to the other track.
8. To stop recording, press the /k button.
1. Hold down the REC button until the setting
screen shown below appears.
2. Use the q and w arrow buttons to select
“Precount”.
3. Use the u and i arrow buttons to enable
(On) or disable (Off) the precount.
4. Press the EXIT button to exit the setting
screen.
To record the other track of a song
 R e c o r d e d P a r t
To configure precount settings