User manual

28
02
03
04
05
01
29
REMOVING A microSD™ CARD
1. Open the microSD
TM
card cover, and use your
thumb to press and release the microSD
TM
card.
2. Press the memory card inward, gently, until it
pops out.
3. Remove the microSD
TM
card and close the
microSD
TM
card cover.
CAUTION
Never remove a memory card from the handset while it is being accessed. Doing so
can damage the memory card or the data stored on it.
The memory card is very small. Make sure you do not drop it.
To ensure the proper function of removable memory, please use a microSD
TM
card.
Failure to completely reseal the memory card slot after removing may result in
damage if the handset is exposed to water.
CONNECTING TO THE HEADSET JACK
You can connect a compatible device equipped with a standard 2.5mm plug to your handset for
safe, convenient, hands-free conversations.
1. To open the Headset Jack cover, insert your
fingertip into the notch and open the cover.
2. Plug the connector into the Headset Jack.
CAUTION
Do not forcibly insert/remove the connector
into/from the Headset Jack. Carefully insert/
remove it.
Failure to completely reseal the Headset Jack
cover after use may result in damage if the
handset is exposed to water.
USING A MEMORY CARD
The
Ravine®2
supports the use of a microSD™ memory card as a source of external memory.
USING A microSD™ CARD
By using a microSD™card, you can store sounds, videos, images, photos, and other files.
INSTALLING A microSD CARD OPTIONAL
1. Open the microSD
TM
card cover, and insert
the microSD
TM
card into the slot with the gold
contacts facing up.
2. Press the microSD
TM
card into the slot until
you hear the click”, then close the microSD
TM
card cover.
3.
CARD INSERTED. PICTURE, VIDEO & SOUND
WILL BE SAVED TO CARD MEMORY. ACCEPT
CHANGES?”
will appear on the display.
4. Press the
Center Select Key
[
Yes
] to confirm.
CAUTION
Whenever installing or removing a memory card, make sure the handset is turned off
and that the Wall/USB Charger is not connected.
When installing or removing a memory card, avoid touching the memory card
contacts and avoid damaging the memory card. Either can cause malfunction or
loss of data.
The front and back of the memory card look different. When inserting the memory
card, make sure the correct side is facing up. If not, the memory card may not fit
in the memory card slot, or the memory card and/or memory card slot may be
damaged.
Do not forcibly insert the memory card into the memory card slot. Hold it with the
contacts facing down and carefully insert it.
Failure to completely reseal the memory card slot after installing may result in
damage if the handset is exposed to water.