User manual

42
01
02
43
02
03
04
05
3. Press and hold the PTT Key/Red Side Key N while talking and then release
the
PTT Key / Red Side Key N to let the other party talk.
USING THE PTT CONTACT LIST
1. From the idle mode, press the PTT Key/Red Side Key N to access your PTT
Contact List.
2. Select the contact and press the
Left Soft Key C [ Alert ].
“Press PTT Key To Alert” message appears on your main display screen.
3.
Press and hold the PTT Key/Red Side Key N while talking and then release
the
PTT Key / Red Side Key N .
You can hear the response while the PTT Key/Red Side Key N is released.
USING A PUSH TO TALK (PTT) BARGE
A barge call automatically connects to the other party. The called party does not have
the option to ignore the call.
BY DIALING THE PHONE NUMBER
1. Enter the phone number.
2. Press and hold the
PTT Key/Red Side Key N on the left hand side of the
phone.
3. Wait until the “
OK to Talk ” tone sounds and the message “ Talking to ” appears
on the display. Speak while pressing down the PTT Key/Red Side Key N .
4. Release the
PTT Key/Red Side Key N to let the other party talk.
5. Press the
END/PWR Key H to end the call.
USING THE PTT CONTACT LIST
1. From the idle mode, press the PTT Key/Red Side Key N to access your PTT
Contact List.
2. Press and hold the
PTT Key/Red Side Key N on your left hand side of the
phone.
3. Wait until the “
OK to Talk ” tone sounds and the message “ Talking to ” appears
on the display. Speak while pressing down PTT Key/Red Side Key N .
4. Release the
PTT Key/Red Side Key N to let the other party talk.
5. Press the
END/PWR Key H to end the call.
ANSWERING CALLS
1. Press the SEND Key G to answer the incoming call.
Depending on your phone’s settings, you may also answer incoming calls by opening
the phone or by pressing
any key .
2. To ignore incoming calls, press the Right Soft Key D [ Ignore ].
ANSWERING PTT CALLS
INCOMING BARGE CALL
When you receive a barge call, you will hear the calling party speaking through the
speakerphone. The calling party’s phone number will appear on your display. If the
calling party’s number has already been registered in your PTT Contact List, the contact
name will replace the phone number on the display.
1. Press and hold the PTT Key/Red Side Key N to talk.
2. Release the
PTT Key/Red Side Key N to let the other party talk.
3. Press the
END/PWR Key H to end the call.
INCOMING ALERT CALL
When you receive an alert, you will hear the “ PTT Alert ” tone. The message “ Incoming
Alert
” will be displayed with the phone number or contact name of the calling party.
The PTT Alert tone repeats every 5 seconds until you answer or ignore the call. If you
do not answer an incoming alert within 20 seconds, the PTT call will be automatically
disconnected.