User manual

100
02
01
02
04
101
05
03
TOOLS
USING VOICE COMMANDS
Your phone is equipped with an AVC (Advanced Voice Commands) feature. This feature
allows you to make calls or use the phone’s functions by simply using your voice. All you
have to do is talk into the phone and the phone will recognize your voice and complete
tasks by itself.
1. Press the Center Select Key [ MENU ], select Settings & Tools and press the
Center Select Key [OK] . Select Tools and press the Center Select Key [OK] .
Select
Voice Commands then press the Center Select Key [OK] .
Shortcut : With the flip open, press the Voice Commands Key O on the left side of your
phone to access Voice Commands.
2. The phone displays the Voice Commands menu and prompts you to say the
name of the command you want to use. To complete your task, simply follow
the voice prompts. You can speak the name of the command after you hear a
beep.
You can hear a beep in the Tone Only Mode (MENU > Settings & Tools > Phone
Settings > Voice Commands Settings > Prompts > Mode > Tones Only) while you can
see a prompt without a beep sound in the Prompts, Readout + Alerts, or Readout.
3. Select either Call <Name or #> , Send <MSG Type> , Go To <Menu> , Check
<Item>
, Contact <Name> , Redial , My Verizon or Help and press the
Center Select Key [OK] .
4. When it recognizes one of these commands, the phone launches the
associated application. If the phone does not hear a command within
approximately eight seconds, AVC mode will turn itself off.
CALL <NAME OR #>:
Use the
Call command to voice dial a name from your Contact List or a phone number.
When dialing a number, pronounce each digit, but do not pause noticeably between
the digits.
1. Press the Center Select Key [ MENU ], select Settings & Tools and press the
Center Select Key [OK] . Select Tools , press the Center Select Key [OK] , select
Voice Commands then press the Center Select Key [OK] .
2. You will hear
Please say a command and the Voice Commands menu will be
displayed.
3. If calling a contact from your list, say
Call <Name> . Your phone will ask you
to confirm the name you said. Say
Yes if it was repeated correctly. That phone
number will be dialed. If there is more than one number saved for that contact,
you will be asked to confirm which number to dial.
Examples : - Call Tom Smith, - Call 617-555-1212, - Call Bob Carson’s mobile, -
Call Dee Harper at Home.
SEND <MSG TYPE>:
Use the
Send command to send a text or other type of message to a specified name
or number.
1. Press the Center Select Key [ MENU ], select Settings & Tools and press the
Center Select Key [OK] . Select Tools , press the Center Select Key [OK] , select
Voice Commands then press the Center Select Key [OK] .
2. You will hear
Please say a command and the Voice Commands menu will be
displayed.
3. Say
Send followed immediately by one of Text , Picture , Video or Voice .
Examples : - Send Text Tom Smith, - Send Picture to Dee Harper’s Mobile.
GO TO <MENU>:
Use the
Go To command to open an application on your phone. You can say Go To by
itself and be prompted to say the application name or you can skip the prompt by
saying
Go To followed by the application name.
1. Press the Center Select Key [ MENU ], select Settings & Tools and press the
Center Select Key [OK] . Select Tools , press the Center Select Key [OK] , select
Voice Commands then press the Center Select Key [OK] .