User Guide

Configuration Wizards

Using the Wireless Wizard (for ISA550W and ISA570W only)

Cisco ISA500 Series Integrated Security Appliances Administration Guide 77

- 802.11b/g/n mixed: Choose this mode to allow 802.11b, 802.11g, and

802.11n clients operating in the 2.4 GHz frequency to connect to the

access point.

- 802.11n only: Choose this mode if all devices in the wireless network

can support 802.11n. Only 802.11n clients operating in the 2.4 GHz

frequency can connect to the access point.

• Wireless Channel: Choose a channel from a list of channels or choose Auto

to let the system determine the optimal channel to use based on the

environmental noise levels for the available channels.

STEP 4 After you are finished, click Next.

Configuring Wireless Connectivity Types

STEP 5 Use the Choose SSIDs page to enable and configure the SSIDs that you want to

use.

• Enable: Check this box to enable the SSID.

• Mode: Choose the wireless connectivity type for each enabled SSID.

- Intranet WLAN Access: Allows the wireless users to access the

corporate network via the wireless network. By default, the WLAN is

mapped to the DEFAULT VLAN.

- Guest WLAN Access: Only allows the wireless users who connect to the

guest SSID to access the corporate network via the wireless network. By

default, the WLAN is mapped to the GUEST VLAN.

- Captive Portal Access: Only allows the users who have authenticated

successfully to access the corporate network via the wireless network.

The wireless users will be directed to a specific HotSpot Login page to

authenticate, and then will be directed to a specified web portal after

NOTE: Only one SSID can be set for Captive Portal access at a time.

STEP 6 After you are finished, click Next.