User Guide

Status
Network Status
Cisco ISA500 Series Integrated Security Appliances Administration Guide 91
3
Traffic Statistics
Use the Traffic Statistics page to view traffic data for the various interfaces. This
page is automatically updated every 10 seconds. Click Refresh to manually
refresh the data. Click Reset to reset the values in the Ethernet table to zero.
Traffic Statistics
Field Description
Ethernet
Port Name of the physical port.
Link Status Shows if the port is connected or not.
Tx Packets Number of IP packets transmitted by the port.
Rx Packets Number of IP packets received by the port.
Collisions Number of signal collisions that have occurred on this
port. A collision occurs when the port tries to send
data at the same time as a port on the other router or
computer that is connected to this port.
Tx Bytes/Sec Number of bytes transmitted by the port per second.
Rx Bytes/Sec Number of bytes received by the port per second.
Uptime Time that the port has been active. The uptime is reset
to zero when the security appliance or the port is
restarted.
WAN
Name Name of the WAN port.
Tx Packets Number of IP packets transmitted by the WAN port.
Rx Packets Number of IP packets received by the WAN port.
Collisions Number of signal collisions that have occurred on this
WAN port .
Tx Bytes/Sec Number of bytes transmitted by the WAN port per
second.
Rx Bytes/Sec Number of bytes received by the WAN port per
second.