GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THE UNIT (N THE US.A, {not application to other areas). NOTICE This equipment has been tested and found to comply wish the limits for a Class B digits device, pursuant to Part 15 of the FCC Rules. These limits are designed 1o provide reasonable protection against harmful interference in a residential installation.
Introduction Congratulations on your selection of fhe BASIC KL-750 Label Printer, This CASIO Label Printer makes it possible for you to print adhesive labels for 4 wide variety of applications, such as: name tags, Cassette tape fables, floppy disks, binders, and other applications.
Part B Character Size and Text Effects .. Character Size To change the character size Taft Effects To spicily text eHo Part 6 Printing Printing a Tape To print a tape Stamp Printing To print & stamp tape Mirror Mags Printing To tum mirror image printing on and off . Other Printing Features and Operations Auto Feed . Te turn auto feed on and off To manually feed tape .. Print Density To adjust the pent density Part Memory .. To stirs data . To recall text from memory .
Label Printer Menus Label Printer aeration is designed o b as simple as possible, thanks 1o greengage menus that you can use to solstice the seeings you need. Each menus described in detail i the sections that folio in his manual, but note the following general points wham using them. « The item that is undefined in a men is the one that's currently selected.
To replace the batteries 1. Turn power off. « It you are using the optional AC adapter tor power, you shooed lase unplug it from the Label Printer. 2. Pen the battery compartment cover an the back of the Label Printer by sliding it in the direction indicated by the arrow. 4. Remove afl sight of the ol batteries. 4. Load a set of eight new batteries into the battery compartment, making sirs that their positive and negative () ends are facing in the corr get directions. 5.
important! Never try to push the tape back into the cassette. Once tape is oul of the cassette, there Is no way o wind &t back in. Trying 10 do 56 can cause operational problems with te Abet Printer. To load a tape cartridge 1. Mike sure that ine Rebel Printer is turned off. 2. Open the tape cartridges compartment Over.
! Part Inputting Characters and Symbols This part of the manual tells yau how to Input characters. To make things easier to understand, we call everything you input character, irregardless of whether it is actually a letter, number, or symbol. Explanations here &l use the default settings halt are in effect from the initial power-on sorer. For information on using other character styles, effects and sizes, see page 10. important! * You can input up to 63 characters per label.
» manual feed indicator This indicator appears when you are using manual feed instead of auto feed. Auto feed is in effect when this indicator is not on the display. Important? + After you finish printing when using manual feed, be sure 1o always press FUNCTION and then PRINT (FEED) to feed the tape before cutting it If yous don't you will cut off part of the printed text. + 6mm tape indicator This indicator appears when you use the procedure on page 6 to spec you ara using Bmm taps.
2. Use the and P cursor keys lo move the underlining to the symbol you want. » Not all of the available symbols fit on the display. The menu will stroll when you pass the cursor keys, * [n this example, underline #, 3. Astor you underling the symbol you ward, press " SET. « This returns o the input screen, with the symbol you selected input at the location where the cur|« sor was lactated when you displayed the symbol tits.
2. Input the new characters (XYLEM. + Inputting the new characters causes them to be inserted at the cursor position. The existing characters are opened up to mask om for the new characters, To change existing characters to different ones Example: T sangs the teat "ABRADE to “XYZOEF", 1. With the original text on the display, use dither the BS key or DEL Koy to delete the characters to be changed (ABC). » Remember to use e correct cursor location for the key you plan to 35 delete the characters.
Text Effects There are three text effects chat you can assign: shading. underlining, and boxed tact. The fallowing shows examples of sate. Shading: ABEYANCE Underlining: ABC., Xylem Boxed Text ABC, XYLEM Text effect changes are applied to printed text Orly, The appearance of the displayed text does ot change, bul the text effect indicators wil show you whee & text effect is being used. Important « Any text effect pacification you make is applied o all the characters on the display.
Stamp Printing The stamp printing feature lets you print on special stamp gaps. You can then chitchat the finished stamp tape to an optionally available stag holder to create your own original per-inked stamps. The following is the types of stamp holder consistently available for use with stamp tapes. Type | Maximum Stamp Size Example ST-15 5.50m e Com 550 790 Note the following important points about stamp printing, « Stamp printing prints texting mirror image.
Auto Feed ‘You can turn the Label Printer's auto feed features on and off, When auto feed is on, the Label Printer automatically feds the pale about 12mm at the beginning and prd of each print operation. This creates identical margin on both sides of you tact important! + After you finish printing when using manual feed, b8 ure to always press FUNCTION snd then PRINT {FEED) to feed the taps before cutting it. If you don't you wil cut off part of the printed text. To turn auto feed on and off 4.
2. Press ¥ io change to the text recall prompt. 3. Press 8ET, « It ali of the text does not fit on the display, you cause € and P 1o scroll @ 1o the left and right. 4. Press W 10 sangs 10 Ares 2. « Use A and ¥ 10 switch between Area 1 and Area, & Press SET fo real the ext from the mica that is currently on the display. « Note that recalling dale from dormitory replaces anything that is cogently an the input display. Memory text cannot be appended. To delete text from memory 1.
» lit hora s & cartridge already in the Label Printer, remove it by grasping tha cartridge on both sides with your thumb and forefinger, and lift straight up. 3. Use & thin, pointed object t fft lhe yellow cotter cartridge ot of the Label Printer as shown in the illustration, " = The tape cutter blade comes out of the cutler cartridge if you press on the front of the granddad. 89 sure lo take care o avoid cutting your fingers on the bias. 4.
To initialize the Label Printer Troubleshooting 1. Turn power off. 2. While hooding down the PRINT and ESC keys, . Probity Possession Cause Aston 5 o or Int ERR! massage | » Attempt 1o input Use oly one +| mark. 3 g and ESC lend down, release ot the ON key only. + oriel display. marks within the same Only twa line of text + This prompt confirms whether or not you want fo text. cane input, 5o text initialize the Label Printer. B consortia only one 4.
Specifications Model: KL750 Input Keyboard Layout: Typewriter (QWERTY) Character Types Alpha {English and other languages): 59 Numbers: 10 .
