User Manual
Table Of Contents
- Contents
- Safety Precautions
- Precautions During Use
- Printer and Bundled Accessories
- Operational Flow for This Printer
- Installing the App
- Names of Parts and Their Functions
- Power Supply
- Turning the Power On and Off
- Installing/Removing Tape Cartridges
- Connecting to a Smartphone
- Printing
- Cleaning
- Troubleshooting
- List of Printer Statuses and LED Indicator Displays
- Specifications
● The LED indicator continuously flashes red.
Probable Cause Required Action
Printer fault Contact your original retailer or a CASIO Service
Center for replacement.
The tape is wrapped around
the rubber roller.
Check the tape cartridge.
● No tape is fed out when I try to print.
Probable Cause Required Action
The cover on the tape
cartridge container is not
shut properly.
Close the cover firmly.
The tape has run out. Replace with a new tape (sold separately).
Tape jam Remove the tape cartridge and pull out the jammed
tape with your fingers. Cut off the tape you pulled out
with scissors, etc. Then reload the tape cartridge
correctly.
Important!
Do not do any of the following during printing:
•
Block the tape outlet
•
Touch the tape being fed out
•
Open the cover of the tape cartridge container
•
Turn off power.
The AC adaptor used is not
the specified AC adaptor.
Use the specified AC adaptor or load new batteries
(third party).
The batteries used are
depleted or are not the
specified type.
● The printer can’t cut the tape.
Probable Cause Required Action
The tape is jammed in the
tape outlet.
Switch the printer off, remove the tape cartridge and
clear the jammed tape.
The tape cutter is worn. Contact your original retailer or a CASIO Service
Center for replacement.
36