User Manual
Table Of Contents
- Contents
- Safety Precautions
- Precautions During Use
- Printer and Bundled Accessories
- Operational Flow for This Printer
- Installing the App
- Names of Parts and Their Functions
- Power Supply
- Turning the Power On and Off
- Installing/Removing Tape Cartridges
- Connecting to a Smartphone
- Printing
- Cleaning
- Troubleshooting
- List of Printer Statuses and LED Indicator Displays
- Specifications
● Labels don’t stick
Probable Cause Required Action
The location or the material
is not suitable.
Labels will not stick onto rough, gritty, wet, oily or
soiled surfaces.
(Page 31)
● Label margins too large
Probable Cause Required Action
The margin is set to “Large”
or “Medium”.
Set the margin to “Small”.
(Due to the construction of the printer, there is always
a margin at the top of the label during printing.)
● The “Printer not connected” error message appears
Probable Cause Required Action
No printer is selected. Locate and select a printer.
(Page 26)
● Can’t connect to a smartphone
● The “Printer not found” error message appears
Probable Cause Required Action
The printer is not turned on.
Press on the printer.
Signal reception is poor. Move the printer to another location.
The printer is in use. Try again.
Bluetooth is not enabled on
the smartphone.
Select ON in the Bluetooth settings.
Depending on your smartphone, you may need to
enable Bluetooth for each app.
Location information is not
enabled on the
smartphone.
Select ON in the location information settings.
Depending on your smartphone, you may need to
enable location information for each app.
None of the above Turn the printer off and then back on.
37