User Manual

- 3 -
INPUTTING TEXT
The following describes how to input text in the Telememo Mode and Alarm Mode. It also
provides details of how text is produced in the text area of the display.
How to input characters
1. When the cursor is blinking in the text area, use and
to scroll through the available letters, numbers and
symbols, in the following sequence.
Holding down either button scrolls through at high
speed.
2. When the character you want at the cursor position is shown, press to move the cursor to
the right.
3. Repeat steps 1 and 2 until your text is complete.
The text area in the Telememo Mode can hold up to eight characters. When the cursor is
located at the eighth space of the text area in this mode, moving the cursor to the right
causes it to jump down to the first digit in the number area. When the cursor is at the 12th
digit of the number area, moving it to the right causes it to jump back up to the first character
of the text area.
You can input only numbers and spaces in the number area. Each press of or changes
the input at the current cursor location in the following sequence:
(space)
A
to
Z0
to
9
-.
6. After you finish inputting data, press to return to the Alarm Mode.
If you input reminder text, the text appears on the display when the alarm time is reached.
Note that reminder text appears only if the watch is in the Timekeeping Mode when the alarm
time is reached. Otherwise, only the alarm tone sounds (without the reminder text).
To stop an alarm once it starts to sound
Press any button to stop an alarm when it starts to sounds. The reminder text for the alarm (if
any) will remain in the text area of the display for about 20 seconds.
To switch an Alarm and Hourly Time Signal on and off
1. In the Alarm Mode, press to select an alarm or the Hourly Time Signal.
2. When the alarm or Hourly Time Signal you want to is selected, press to switch it on and
off.
x Indicates alarm is ON
y Indicates Hourly Time Signal is ON
If any alarm is on, the Alarm On Indicator is shown on the display when you change to
another mode.
To test the alarm
Hold down while in the Alarm Mode to sound the alarm.
DUAL TIME MODE
The Dual Time function of this watch lets you keep track of
time in a different time zone.
In the Dual Time Mode, the seconds count is
synchronized with the seconds count of the
Timekeeping Mode.
In the Dual Time Mode, press to switch between the
12-hour and 24-hour formats.
To set the Dual Time
1. Press while in the Dual Time Mode. The hour digits
flash on the display because they are
selected
.
2. Press to change the selection in the following
sequence.
Seconds
Mode indicator
Minutes
Hour
Month-Date
Hour DateMinutes Month
3. Press to increase the selected digits and to decrease them. Holding down either
button changes the selection at high speed.
4. After you set the time, press to return to the Dual Time Mode.
COUNTDOWN ALARM MODE
The countdown timer can be set within a range of 1
minute to 24 hours. When the countdown reaches zero,
an alarm sounds for 10 seconds or until you press any
button.
Note that you can also select auto repeat timing that
automatically restarts the countdown from the original
value you set whenever zero is reached.
To set the countdown start time
1. Press while in the Countdown Alarm Mode. The
hours digit flashes on the display because it is
selected
.
2. Press to change the selection in the following
sequence.
Seconds
Mode indicator
Minutes
Hours
Current time
Hours Minutes
3. Press to increase the selected number. Holding down changes the selection at high
speed.
To set the starting value of the countdown time to 24 hours, set
0:00 .
4. After you set the countdown start time, press to return to the Countdown Alarm Mode.
To use the countdown timer
1. Press while in the Countdown Alarm Mode to start the countdown timer.
2. Press again to stop the countdown timer.
You can continue countdown timer operation by pressing .
3. Stop the timer and then press to reset the countdown time to its starting value.
When the end of the countdown is reached and auto repeat timing is off, the alarm sounds for
10 seconds or until you stop the alarm by pressing any button. Countdown timing stops, and
the countdown time is automatically reset to its starting value after the alarm stops.
To switch auto repeat timing on and off
1. Press while in the Countdown Alarm Mode. The
hours digit flashes on the display because it is
selected
.
2. Press to switch auto repeat on and off.
3. Press to return to the Countdown Alarm Mode.
When the end of the countdown is reached while auto
repeat is on, the alarm sounds, but the countdown
restarts from the beginning without stopping. You can
stop the countdown by pressing and manually reset
to the start time by pressing .
Auto repeat on indicator
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is 23
hours, 59 minutes, 59.99 seconds.
Current time
Seconds
Hours
Minutes
Mode indicator
1/100 second
(a) Elapsed time measurement
Start Stop Re-start Stop Clear
(b) Split time measurement
Start Split Split release Stop Clear
(c) Split time and 1st-2nd place times
Start Split Stop Split release Clear
First runner Second runner Record time
finishes. finishes. of second
Record time of runner.
first runner.
Number area
Text area
Cursor
If you do not perform any button operation for about two or three minutes while the cursor is
on the display, the watch automatically returns to the normal data display (the cursor
disappears).
How the text display scrolls
The text area of the display can show only six characters at the time, so longer text scrolls
continuously from right to left.
MEETING<MEE
Continuously scrolls
Text area
Last letter of text
Separator (inserted automatically)
CHARACTER LIST
1 (space) 11 J 21 T 31 3
2 A 12 K 22 U 32 4
3 B 13 L 23 V 33 5
4 C 14 M 24 W 34 6
5 D 15 N 25 X 35 7
6 E 16 O 26 Y 36 8
7 F 17 P 27 Z 37 9
8 G 18 Q 28 0 38 -
9 H 19 R 29 1 39 .
10 I 20 S 30 2
0
to (space)
Press
Press
9
x
C C
C
C
C
C
C
C
C
C
C C
C
C
C
M
M
M
B
C C
B B
C CC C
B
B
B B
B
B
B
B
B
B
B
B
B
B
A
A
A
A
A
A
A