Operation Guide

World Time
World Time lets you look up the current time
in any one of 39 cities around the globe, and
UTC (Coordinated Universal Time).
Note
●
World Time cities that can be selected
only by using EDIFICE Connected
cannot be selected using watch
operations.
l
Configuring World Time Settings
Getting Ready
Enter the World Time Mode.
l
Navigating Between Modes
Checking World Time
Entering the World Time Mode will initially
display the name of the currently selected
World Time City, followed by the current time
in that city.
World Time City
World Time
●
To display the World Time City while in the
World Time Mode, press (A).
World Time City Setting
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also enable
or disable summer time.
Note
●
The initial factory default summer time
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
1. Use (E) to display the city you want.
2. To change the summer time setting, hold
down (A) for at least two seconds.
Release the button when [AUTO] starts to
flash.
3. Use (E) to select a summer time setting.
Each press of (E) cycles through available
settings in the sequence shown below.
●
[AUTO]
The watch switches between standard
time and summer time automatically.
●
[OFF]
The watch always indicates standard
time.
●
[ON]
The watch always indicates summer
time.
4. Press (A) to exit the setting screen.
Note
●
While [UTC] is selected as the city, you
will not be able to change or check the
summer time setting.
●
If you select a World Time City with
EDIFICE Connected and then change
to a different city with a watch
operation, the EDIFICE Connected
city information will be deleted from the
watch.
l
Configuring World Time Settings
Swapping Your Home Time
and World Time
Press (A) and (B) at the same time to swap
your Home Time and World Time.
World Time
World Time
Home Time
Home Time
After swappingBefore swapping
Note
●
This function comes in handy when
you need to move to another time
zone. For details about how to use it,
go to the section below.
l
Moving to Another Time Zone
Adjusting Time
Settings Manually
When there is no communication with a mobile
phone, the time and date can be adjusted with
the procedure below.
Getting Ready
Enter the Timekeeping Mode.
l
Navigating Between Modes
Setting a Home Time City
Use the procedure in this section to select a
city to use as your Home City. If you are in an
area that observes summer time, you can also
enable or disable summer time.
Note
●
The initial factory default summer time
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
Operation Guide 5537
15