Operation Guide

1. Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
2. Use (B) and (E) to change the Home City.
●
For details refer to the information
below.
l
City Table
3. Press (D).
4. Use (E) to select a summer time setting.
Each press of (E) cycles through available
settings in the sequence shown below.
●
[AUTO]
The watch switches between standard
time and summer time automatically.
●
[OFF]
The watch always indicates standard
time.
●
[ON]
The watch always indicates summer
time.
5. Press (A) to exit the setting screen.
Setting the Time/Date
1. Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
2. Keep pressing (D) until the setting item
you want to change is selected.
●
Each press of (D) moves to the next
setting item in the sequence shown
below.
Power Saving
Auto adjust
Illumination duration
Auto Light enable/disable
Operation tone enable/disable
Day of the week language
Date display format
12/24-hour timekeeping
Day
Month
Ye a r
Minutes
Hours
Seconds
Summer time
Home City
3. Configure the date and time settings.
●
To reset the seconds to 00: Press (E). 1
is added to the minutes when the
current count is between 30 and 59
seconds.
●
Use (B) and (E) to change the other
settings.
4. Repeat steps 2 and 3 to configure the
other settings.
5. Press (A) to exit the setting screen.
Switching between 12-hour
and 24-hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1. Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
2. Press (D) eight times.
This causes [12H] or [24H] to flash on the
display.
3. Press (E) to toggle the setting between
[12H] (12-hour timekeeping) or [24H] (24-
hour timekeeping).
24-hour timekeeping12-hour timekeeping
4. Press (A) to exit the setting screen.
Operation Guide 5537
16