Operation Guide

Q3
I changed the phone’s Bluetooth
from enabled to disabled, and now I
can’t connect anymore.
On the phone, re-enable Bluetooth, and then
go to the Home Screen and tap the “EDIFICE
Connected” icon. Next, on the watch, hold
down (C) for at least 1.5 seconds.
Q4
I can’t connect after turning off the
phone.
Turn on the phone and tap the “EDIFICE
Connected” icon. Then on the watch, hold
down (C) for at least 1.5 seconds.
Phone-Watch Connection
Q1
I can’t establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the “EDIFICE Connected” icon.
Next, on the watch, hold down (C) for at
least 1.5 seconds.
Has the watch been re-paired with the
phone?
After deleting pairing information from
EDIFICE Connected, re-pair them.
l
Unpairing
If you are unable to establish a
connection...
Use the procedure below to delete the
pairing information from the watch, and
then re-pair the watch and phone.
A Hold down (D) for at least two
seconds to enter the Timekeeping
Mode.
B Hold down (A) for at least two
seconds until the name of the
currently selected Home City is
displayed.
C Press (D) twice so the seconds digits
are flashing.
D Hold down (B) for at least two
seconds. Release the button when
[CLR] stops flashing. This deletes the
pairing information from the watch
and returns to the timekeeping
display.
Changing to a Different
Phone Model
Q1
Connecting the current watch to
another phone.
Pair the watch with the phone.
l
If you purchase another phone
Auto Time Adjustment by
Bluetooth Connection (Time
Adjustment)
Q1
When does the watch adjust its time?
The watch will connect with the phone and
perform auto time adjustment at around 12:30
a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The
connection is automatically terminated after
auto time adjustment is complete.
Q2
Auto time adjustment is not
performed at a scheduled time.
Is auto time adjustment not being
performed according to its normal
schedule?
Note that auto time adjustment is not
performed for 24 hours after swapping of
the Home Time and World Time, or after
the time setting is adjusted manually on
the watch. Auto time adjustment will
resume 24 hours after either of the above
operations is performed.
Is a stopwatch or timer operation being
performed?
Auto time adjustment will not start at the
scheduled times if a stopwatch or timer
operation is in progress. Stop the
stopwatch or timer operation.
l
Stopwatch
l
Timer
Is auto time adjustment enabled?
Auto time adjustment will not be
performed at the scheduled times unless
it is enabled. Enable auto time
adjustment.
l
Using the Watch in a Medical Facility or
Aircraft
Operation Guide 5537
23