Operation Guide

Adjusting Time
Settings Manually
You can use the procedure below to adjust the
watch’s time and day settings when time
calibration signal reception or communication
with a phone is not possible for some reason.
Selecting Your Home City’s
Time Zone
Use the procedure in this section to select the
time zone of the city you want to use as your
Home City.
Important!
●
If you do not specify the time zone
where you are using the watch, the
current time setting will not be correct
after it is adjusted based on a time
calibration signal.
1. Pull out the crown to the second click.
The second hand indicates the currently
selected time zone, while the mode hand
indicates the current summer time setting.
●
The time zone is indicated as a time
offset. ±0 hours is indicated when the
second hand is at 12 o’clock, with other
offsets indicated when it is to the left and
right of 12 o’clock. For information about
time zone positions, go to the section
below.
l
City (Time Zone) List
Tokyo (+9 offset)
30
Crown
Time zone (+9 position)
Summer time setting
2. Rotate the crown to change the time zone.
3. Push the crown back in to its normal
position.
Adjusting the Time and Day
Setting
1. Pull out the crown to the second click.
The second hand will point to the currently
selected time zone.
●
The mode hand will point to the summer
time setting for the currently selected
Home City.
30
Summer time setting
Time zone
Crown
2. Hold down (C) for about one second.
This causes the second hand to move to
12 o’clock, and enables the minute setting
operation.
3. Rotate the crown to change the minute
setting.
4. Press (C).
The hour hand will move slightly,
indicating that the hour setting operation
is enabled.
5. Rotate the crown to change the hour
setting.
6. Press (C).
This enables the year ten’s digit setting
operation.
7. Rotate the crown to move the second
hand to the desired setting for the year
ten’s digit.
80 40
90
30
20
50
70
10
60
00
Year (10’s digit)
8. Press (C).
This enables the year one’s digit setting
operation.
9. Rotate the crown to move the second
hand to the desired setting for the year
one’s digit.
84
9
3
2
5
7
1
6
0
Year (one’s digit)
10. Press (C).
This enables the month setting operation.
84
9
3
2
5
7
1
6
12
10
11
Month
11. Rotate the crown to change the month.
12. Press (C).
The mode hand will move slightly,
indicating that the day setting operation is
enabled.
30
Day
●
Changing the day setting will cause the
mode hand to rotate repeatedly.
l
Hand and Day Indicator Movement
13. Rotate the crown to change the day.
14. On a time signal at the top of a minute,
push the crown back in.
Note
●
If the watch does not indicate the
correct time even after you adjust it,
adjust the hand and day indicator
positions.
l
Using OCEANUS Connected to
Correct Hand Positions
l
Using Watch Operations to Make
Adjustments
Operation Guide 5542
11