Operation Guide

Unpairing
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
3030
DisconnectedConnected
2.
Y
Tap the “OCEANUS Connected” icon.
3.
Y
Perform the operation shown on the
phone screen to unpair.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
C
Pair the watch with a phone.
Configuring World Time
Settings
Specifying a World Time City with OCEANUS
Connected causes the watch’s World Time
City to change accordingly. The standard
time/summer time setting of the World Time
will be adjusted automatically without any
watch operation required by you.
30
Note
●
OCEANUS Connected World Time
lets you select from among
approximately 300 cities as the World
Time City.
● Selecting a World Time City
1.
Y
Tap the “OCEANUS Connected” icon.
2.
X
Hold down (C) for about four seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
●
You can determine whether a World
Time is a.m. or p.m. by checking the
position of the small 24-hour hand.
30
World Time hour (24-hour)
World Time hour and minute
● Configuring the Summer Time Setting
1.
Y
Tap the “OCEANUS Connected” icon.
2.
X
Hold down (C) for about four seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to select a summer time
setting.
●
“Auto”
The watch switches between standard
time and summer time automatically.
●
“OFF”
The watch always indicates standard
time.
●
“ON”
The watch always indicates summer
time.
Note
●
While the summer time setting is
“Auto”, the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch’s summer time setting as “Auto”.
●
Changing the time setting manually
with a watch operation will cancel auto
standard time/summer time switching.
●
A OCEANUS Connected screen
shows information about summer time
periods.
● Swapping Your World Time and Home
Time
1.
Y
Tap the “OCEANUS Connected” icon.
2.
X
Hold down (C) for about four seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
For example, if your Home City is Tokyo
and the World Time City is New York, they
will be swapped as shown below.
●
The second hand will point to the time
zone of the currently selected World
Time City for a few seconds after you
swap times.
30 30
World Time City
(New York)
World Time City
(Tokyo)
Home City
(New York)
Home City
(Tokyo)
After swappingBefore swapping
Operation Guide 5542
9