Operation Guide
Table Of Contents
- Before Getting Started...
- Time Adjustment
- Using Mobile Link with a Mobile Phone
- Dual Time
- Stopwatch
- Timer
- Alarm
- Adjusting Hand and Day Indicator Alignment
- Other Settings
- International Travel
- Other Information
- Troubleshooting
Before Getting
Started...
This section provides an overview of the watch
and introduces convenient ways it can be
used.
Note
●
The illustrations included in this
operation guide have been created to
facilitate explanation. An illustration
may differ somewhat from the item it
represents.
Watch Face Items
②
①
③
④
⑤
⑨
⑦
⑥
⑧
A Day of week
In the Calendar Mode, the mode hand
points to the day of the week in the Home
City.
B Summer time setting
The mode hand points to the current
summer time setting.
C [ST]
In the Stopwatch Mode, the mode hand
points to [ST].
D [TR]
In the Timer Mode, the mode hand points
to [TR].
E [AL]
In the Alarm Mode, the mode hand points
to [AL].
F [C]
When connection with the phone starts,
the second hand will point to [C].
G [RC]
The second hand points to [RC] while time
calibration signal reception is in progress.
H Alarm on/off setting
In the Alarm Mode, the second hand
indicates if the alarm is enabled or
disabled.
[ON]: Alarm enabled
[OFF]: Alarm disabled
I Last receive result, phone connection
status, Airplane Mode setting
Last receive result:
The second hand indicates the last
receive result if the watch has never been
paired with a phone, or if the phone pairing
data has been deleted on the watch.
[Y(YES)]: Auto time adjustment
successful
[N(NO)]: Auto time adjustment failed
Phone connection status:
The second hand indicates the phone
connection status if the watch has been
paired with a phone.
[Y(YES)]: The watch is connected to your
phone.
[N(NO)]: The watch is not connected to
your phone.
Airplane Mode setting:
The second hand indicates if auto time
adjustment (Airplane Mode) is enabled or
disabled.
[Y(YES)]: Auto time adjustment enabled
(Airplane Mode disabled)
[N(NO)]: Auto time adjustment disabled
(Airplane Model enabled)
Navigating Between Modes
Press (C) to cycle between modes.
●
In any mode, hold down (C) for at least one
second to enter the Calendar Mode.
CC
CC
30
Alarm Mode
Timer Mode
Stopwatch Mode
Calendar Mode
Mode hand
●
Connecting with a Phone
Hold down (B) for at least 0.5 seconds until the
second hand points to [C].
B
30
30
After connection
Before connection
Mode Overview
●
Calendar Mode
The main hour, minute, and second hands
indicate the current time.
The small hour and minute hands show
another time (Dual Time).
30
③
②①
④⑤
⑥
Last Time
Adjustment Result
A Current location time (24-hour time)
One revolution every 24 hours.
B Day of the week at current location
C Dual Time minute
D Dual Time hour
E Dual Time hour (24-hour hand)
The hand points to the A-side for a.m.
times, and to the P-side for p.m. times.
F Current location date
Time Adjustment Using a Time Calibration
Signal
Hold down (B) for at least 0.5 seconds until the
second hand points to [RC].
●
A manual time calibration signal receive
operation cannot be performed while the
watch is paired with a phone.
Swapping the Current Location Time and
Dual Time
Hold down (A) for at least three seconds.
Connecting with a Paired Phone to Adjust
the Watch’s Time
Hold down (B) for at least 0.5 seconds until the
second hand points to [C].
Searching for a Paired Phone
Hold down (B) for at least five seconds.
Operation Guide 5625
2