Operation Guide

Changing the Home City
Summer Time Setting
●
Enter the Calendar Mode and then press
(B). Next, check to make sure that the
second hand is pointing to [Y(YES)].
●
If the second hand is not pointing to
[Y(YES)], refer to the information at the link
below.
l
Connecting with a Phone
1.
Y
Tap the “MR-G Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Self-Check Feature
MR-G Connected automatically performs a
self-check operation once a day to determine
whether or not watch functions are operating
normally.
Note
●
You can also trigger a self-check
operation manually.
●
You can use MR-G Connected to view
a self-check procedure log.
●
The self-check operation is performed
by MR-G Connected, and not by the
watch.
Connection
Connecting with a Phone
Your watch can connect with a phone that is
paired with it.
●
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l
C
Pair the watch with a phone.
● Checking the Connection with Your
Phone
1.
X
Enter the Calendar Mode.
l
Navigating Between Modes
2.
X
Press (B).
This will cause the second hand to
indicate the connection status.
●
The second hand points to [Y(YES)]
when the watch is connected with your
phone.
●
The second hand points to [N(NO)]
when the watch is not connected with
your phone.
If the watch is not connected with your
phone, perform the procedure at the link
below to connect them.
l
Connecting with a Phone
● Connecting with a Phone
1. Move the phone close to (within one meter
of) the watch.
2.
X
Hold down (B) for at least 0.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
●
Once the watch and phone are
connected, the connection is
maintained.
Important!
●
If you have problems establishing a
connection, it could mean that MR-G
Connected is not running on your
phone. On your phone’s home screen,
tap the “MR-G Connected” icon. After
the app starts up, hold down the
watch’s (B) button for at least 0.5
seconds.
Unpairing
Unpairing the watch from a phone requires
both MR-G Connected and watch operations.
Note
●
If you are using an iPhone, also delete
the pairing information stored on the
phone.
● Deleting Pairing Information from MR-G
Connected
1.
Y
Tap the “MR-G Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to unpair.
● Deleting Pairing Information from the
Watch
1.
X
Hold down (C) for at least one second
to enter the Calendar Mode.
2.
X
Loosen the crown and then pull it out to
the second click.
The second hand will point to the currently
selected time zone.
●
The mode hand will point to the summer
time setting for the currently selected
Home City.
30
Summer time setting
Time zone
Crown
Operation Guide 5625
13