MZ-X500 MZ-X300 Firmware Version 1.
Updates Provided by Firmware Version 1.10 Firmware changes provided by Version 1.0X are those described below.
6. In response to the “Sure? Yes/No” message that appears, touch “Yes”. • Firmware updating takes about 30 minutes. Do not touch the Digital Keyboard during that period. • A progress bar will appear on the display to show you the progress of the update. • The Digital Keyboard will automatically restart after the update is complete. 7. After the Digital Keyboard restarts, remove the USB flash drive. This completes the firmware update operation.
■ Addition of Decay Time Key Follow for Hex Layer tones (MZ-X500 only) Addition of decay time key follow for Hex Layer tones by this version results in addition of the parameters shown below. Display Name Filter >Enter Decay Time Key Follow Amp >Enter Decay Time Key Follow Description Settings This is a group of editable filter parameters. Adjusts the amount of change in the filter envelope decay time between neighboring keyboard keys. A greater value represents greater change.
■ Addition of a Group setting for pads (Both MZ-X500 and MZ-X300) This update adds a Group function that makes it possible to alternate multiple pads with the pad Setting Item. Display Name Group Description Assigns a group number (1 to 8) to a pad. Performing a pad operation while the operation of another pad with the same group number is being performed causes the ongoing pad operation to stop as the new pad operation is started.
Firmware Version 1.21 New Functions This section explains functions that are changed with firmware Version 1.21. ■ Addition of User Sampling Sets (Both MZ-X500 and MZ-X300) Sampling data specifications have been enhanced, and it is now possible to select User Sampling Sets. A User Sampling Set consists of multiple sets of user sampling data, and you can select one User Sampling Set to use from among of a total three sets (A to C).
MA1605-A 7