User Manual

Advanced features

Other character settings

You can also set clerk names and receipt messages.

 Setting receipt message

There are ve lines for receipt message as shown below.

YOUR RECEIPT

THANK YOU

CALL AGAIN

01−21−2015 15:17

1 Line No.1

2 Line No.2

3 Line No.3

4 Line No.4

5 Line No.5

You can set message line by line.

Sample Operation

Line No. 1

CASIO

Programming to print

CASIO

on top of the receipt.

Step Operation

1 Turn the Mode switch to PGM position and press X and

o keys to make the Register in the program mode.

2 Enter the message number (in this example 1), and press

u key. The Register is set to program the rst line of the

receipt message.

3 Input message of the rst line.

In this example,

CASIO

h <<< ' <

ZZZZ VVV

<S> <I>

NNN

<O>

4 Press p key to set the message of the rst line. If you

wish to set another line, repeat steps 2 through 4.

5 Press o key to complete the setting.