SERVICE MANUAL ELECTRONIC CASH REGISTER SE-S400/PCR-T500/PCR-T520 (EX-291) SE-C450 (EX-591) SE-S3000/PCR-T2300/PCR-T2400 (EX-294) SE-C3500 (EX-594) MAR.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 CONTENTS 1. SPECIFICATIONS........................................................................................................... 1 2. INITIALIZATION .............................................................................................................. 2 3. INITIAL PROGRAM LOADER ........................................................................................ 4 4. DISASSEMBLY........................................
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 1. SPECIFICATIONS 1-1. Electrical Specifications Power consumption In operation Max. Mode off Max. 100 V 120 V 220 V 230 V 0.4 A 0.26 A 0.05 A 0.04 A Memory protection Back-up battery Back-up period Battery life Alkaline Battery (size AA / 2 pcs) 1 year (25 °C) Replace the battery every 1 years. Clock & Calendar Accuracy Auto calendar Within ± 30 sec. per month (25 °C) Effective until 2099 A.D. 240 V 1-2.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 2. INITIALIZATION (1) Plug the power cord to a power outlet with the Mode Switch OFF. (2) While holding down the key, turn the Mode Switch to [PGM]. NOTE: The key to press varies according to the model. See below. One-printer model [FEED] Two-printer model [JOURNAL FEED] (3) Release the key. (4) The display below appears when you release the key. INIT 0000000000 (5) Enter the INIT Code to set the INIT Code.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 (6) When INIT Code setting is complete, the display below appears and the result is printed out. [DEPT Setting [PLU Setting [Key Setting [Date Setting [Clerk Setting [Message Setting [POP Setting [Tax Setting Select & [Printout of the Result] ] ] ] ] ] ] ] ] Clearing a machine lock up If you make a mistake in operation, the cash register may lock up to avoid damage to programs and preset data.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 3. INITIAL PROGRAM LOADER When replacing the Main PCB (PCB ASSY/E291-1) with a new part, perform the following steps. 3-1. Preparation Prepare the SD card which contains the APLI module (IPL file) in the root directory. 3-2. Procedure (1) Unplug the power cord from the power outlet. (2) Turn the Mode Switch to [PGM]; while holding down the key, connect the power cord to the power outlet.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 (5) When IPL is complete, the INIT screen shown below appears. INIT 0000000000 (6) For setting LOCALE value and INIT Code, perform the steps below to launch the diagnostic program. 1 Press 99990000s. BATT KEY S (7) The screen display varies according to the model and the status. DW1 CLOSE PRINT 1 MODE 1 When you enter the LOCALE value, writing of the LOCALE value starts and the result is printed out. 1 Press X 0016s.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 (10) The display below appears when you release the key. INIT 0000000000 (11) Enter the INIT Code to set the INIT Code. NOTE: It will take about 1 minute. 1 Press "INIT code" s.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 4. DISASSEMBLY 4-1. Important • Please note that the product on this manual may appear to be different from the actual one according to the changes such as engineering design change. • In order to prevent static and avoid leaving grease from the hand, wear conductive gloves, finger cots, or anti-static band when assembling/disassembling the product. • Do not use metal tweezers. Be sure to use plastic tweezers with flat tips.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 4-2. Flowchart See the flowchart below for the order of disassembling major components. A. Preparation B. CASE/UPPER C. PCB ASSY/E292-COM D. PRINTER E. PCB ASSY/E291-1 F. DRAWER I. DP-ASSY H. PS-UNIT J. REAR DISPLAY K. KEY BLOCK L. SWITCH ASSY/ MODE KEY 4-3. Procedure A. Preparation A-1. Remove the parts listed below, if any.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 B-2. Disengage the hooks and remove the CASE/UPPER. NOTE: It is connected by the cable. Remove the CASE/UPPER carefully. Hooks Hooks Hooks NOTES ON ASSEMBLY Run the FFC for the Customer Display through the hole of the case. B-3. Disconnect the cable (Main Display), FFC (Customer Display), and FPC (Key).
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 C. PCB ASSY/E292-COM C-1. C-2. C-3. C-4. Remove the COVER/CONNECTOR. Undo four lock screws. Disconnect the CABLE/FFC JOINER. Remove the PCB ASSY/E292-COM. PCB ASSY/E292-COM Lock screws (4) CABLE/FFC JOINER COVER/CONNECTOR D. PRINTER NOTE: This procedure is applicable for a single printer. Repeat the steps for two-printer models. D-1. Undo two screws. D-2. Disconnect one FPC. D-3. Remove the PRINTER.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 E. PCB ASSY/E291-1 E-1. E-2. E-3. E-4. E-5. Disconnect two FPCs. Disconnect the CABLE/FFC JOINER. Disconnect four connectors. Undo one screw and then remove the HOLDER/IC. Undo three screws. HOLDER/IC Screw (S5) Connectors FPC Connector FPC CABLE/FFC JOINER Screw (S4) Screws (S4) PCB ASSY/E291-1 NOTES ON ASSEMBLY Secure lead wires in place with tape. Run the cable through this groove.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 F. DRAWER F-1. Undo two screws. Screw (S4) Screw (S5) F-2. Remove the DRAWER. NOTES ON ASSEMBLY Run the DRAWER cable through this hole.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 G. MOTOR-ASSY H. PS-UNIT G-1. Undo two screws. G-2. Remove the MOTOR-ASSY. H-1. Remove the PS-UNIT. MOTOR-ASSY Screws (S1) PS-UNIT NOTES ON ASSEMBLY Be sure to attach CUSHION/120X6 when replacing the PS-UNIT. CUSHION/120X6 Attach the cushion in the middle as shown in the photo and fold the edges.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 I. DP-ASSY I-1. Undo four screws and then remove the SPRING/TILT. All "S1" screws SPRING/TILT I-2. Undo two screws and then remove the HINGE/DISPLAY. Screws (S1) HINGE/DISPLAY I-3. Remove the DP-ASSY. Hook NOTE: While paying attention not to damage the case, open the case with a tool and disengage the hook.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 DP-ASSY CASE/DISPLAY PCB ASSY/E291-E2-1 W-TAPE/77X4.5 W-TAPE/110X4.5 BOARD/DISPLAY J. REAR DISPLAY J-1. J-2. Disengage two hooks and then remove the REAR DISPLAY BLOCK. Disengage three hooks and then remove the BUSH/RDP.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 J-3. Disengage four hooks and then remove the MASK/R-DISPLAY. CASE/R-DISPLAY PCB ASSY/E291-E2-2 W-TAPE/45X9.5 W-TAPE/110X4.5 MASK/R-DISPLAY BOARD/R-DISPLAY NOTES ON ASSEMBLY Be sure that the LCD surfaces are clean.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 K. KEY BLOCK K-1. K-2. K-3. Disconnect one FPC. Undo eight screws. Remove the KEY BLOCK. FPC NOTES ON ASSEMBLY Secure the FPC. All "S1" screws L. SWITCH ASSY/MODE KEY L-1. L-2. Undo one screw. Remove the SWITCH ASSY/MODE KEY.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 5. DIAGNOSTIC PROGRAM 5-1. Launching The Diagnostic Program (1) Set the paper. (2) Perform initialization. 1 2 3 Plug the power cord to a power outlet with the Mode Switch OFF. While pressing the keys below, turn the Mode Switch to [PGM]. One-printer model [FEED] Two-printer model [JOURNAL FEED] Initialization is complete when "INIT" appears on the Main Display. INIT 0000000000 (3) Press 99990000s.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 5-3. Notes For The Diagnostic Program • All test results from a two-printer-type model are printed from the Receipt Printer. • For the number of test to perform, you may select "once" or "infinite loop". If "0" is entered as the number of times to perform the test, the test will be performed only once. If any value between "1" and "9" is entered, the test is repeated infinitely.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 5-4. Check Item This diagnostic program tests the following items. No.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 5-5. Operation Of Each Test [1] Status Display [Function] Displays the status of various functions.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 [2] Batch Test 1 [Function] RAM, printer, time setting, buzzer and drawer tests are performed continuously. [Operation] Command : 1 k Performs the following tests in sequence. NOTE: Refer to each check item for details. (1) (2) (3) (4) (5) (6) RAM test Test print Time setting: Set the following data. Arranged data: 2005 December 31,23:59’30 Buzzer: Ring once the one shot buzzer. No print or display in this test.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 [4] RAM Test (Write/Read) [Function] Write/read test is performed. [Operation] Command : n 0 1 1 k n: Number of times to run 0 1~9 Once (Can be omitted) Infinite loop (To forcibly terminate the test, press the C key.) [Display of the Result] RAM WR OK [Printout of the Result] RAM RAM WR END [5] 11 OK 11 Flash ROM Test (Clear/Write/Read) [Function] After clear function clears the memory, write/read test is performed.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 [6] SD Card Test (Write/Read, Report) [6-1] SD Card Write/Read Test [Function] Writes the text file for the test (test.txt) on the SD card and tests whether the written file can be read. [IMPORTANT] The test result shows NG if you use a write-protected SD card. The text file written during the test (test.txt) will not be erased. If the SD card contains a file with the same name (test.txt), delete "text.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 [7] Display Test [Function] Tests the Main Display and the Customer Display. [Operation] All test procedures are the same for both tests except for the input command. Main Display Command : n 021k Customer Display Command : n 022k n: Number of times to run 0 1~9 Once (Can be omitted) Infinite loop (To forcibly terminate the test, press the C key.) Pressing any key changes the display.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 [8] Back Light Test [Function] Tests the Back Light of the Main Display and the Customer Display. [Operation] All test procedures are the same for both tests except for the input command.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 [Main Display Contrast Adjustment] ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 12345678901234567890123456 78901234567890123456789012 ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 12345678901234567890123456 65432109876543210987654321 CONTRAST XX ←← XX is the adjustment value [Customer Display Contrast Adjustment] Main Display Customer Display ABCDEFGHIJKLMNOPQRST XX ←← XX is the set value CONTRAST [Display of the
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 [10] Internal Printer Character Print Test [Function] Tests if the internal printer prints characters correctly. [Operation] Command : a c n 03 d k a: Printing property 0 Normal print out 1 Reduced size print out c: Characters to be printed 0 Prints the character "B" 1 Prints all characters n: Number of times to run 0 1~9 Once (Can be omitted) Infinite loop (To forcibly terminate the test, press the C key.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 [Printout of the Result (One-printer model) ] Receipt Printer Receipt Only (10033) Journal Only (10034) Receipt and Journal (10035) – 29 –
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 [11] RS232C Test (Port Test, Batch Test) [Function] Tests the communication of RS232C using the loop back tool. [IMPORTANT] Information of the loop back tool. Pin assignment on the register side (male) 1 5 6 9 Pin Signal Name 1 DCD 2 RxD 3 TxD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI Connection information [11-1] RS232C Port Test [Operation] Connect the loop back tool to the connector which you wish to test.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 [11-2] RS232C Port Batch Test [Operation] Connect the loop back tools to COM1 and COM2. Command : 4 0 k Baud rate (bps) COM1=19.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 [12] Time & Date Setting/Time & Date Display [Function] Allows you to check or change the time (hour, minutes, seconds) and date (year, month, day) that are currently set. [12-1] Time & Date Setting [Operation]
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 [14] Buzzer Test [Function] Tests whether buzzer sounds correctly. [Operation] Command : n 0 9 2 k n: Number of times to run 0 1~9 Once (Can be omitted) Infinite loop (To forcibly terminate the test, press the C key.) • If you select "once", one-shot buzzer sounds. • If you select "infinite loop", 500-msec intermittent buzzer sounds repeatedly. [Printout of the Result] BUZZ END 92 92 [15] Key Test [Function] Tests keys.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 [Key Code Chart] Stroke Key 082 076 073 070 067 060 053 046 039 032 025 088 081 075 072 069 066 059 052 045 038 031 024 018 087 080 007 008 009 065 058 051 044 037 030 023 015 086 079 004 005 006 064 057 050 043 036 029 085 078 001 002 003 063 056 049 042 035 028 014 013 084 000 C 011 012 062 055 048 041 034 027 079 Hybrid Key 039 040 038 036 033 026 021 049
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 [16] OBR Test NOTE: This test is effective only COM2. [Function] This is a scanner test. The test enters the wait mode for the scanner input, and waits only for scanner. The test determines the result between OK and NG by comparing the fixed data and the read data. * The fixed barcode is as follows. [Operation] Command : 9 5 k • To end the display, press the C key.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 6. PCB LAYOUT 6-1.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 7. EXPLODED VEW / PARTS LIST 7-1. EXPLODE VIEW (BODY).................................................................................. 38 7-2. EXPLODE VIEW (STROKE KEY)..................................................................... 39 7-3. EXPLODE VIEW (HYBRID KEY)....................................................................... 40 7-4. PARTS LIST................................................................
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 7-1.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 7-2.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 7-3.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 7-4. PARTS LIST 1 SE-S400_SR 2 SE-S400_BK N Item 1 2 3 4 5 5 5 5 6 6 6 6 6 6 6 6 6 6 7 8 S1 9 10 10-1 10-2 10-3 11 12 13 14 15 15 16 17 18 19 20 21 22 22 22-1 22-2 22-3 22-4 23 24 S1 S2 S3 S4 S5 3 PCR-T500 4 PCR-T520 Code No.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 1 SE-S400_SR 2 SE-S400_BK N Item 25 26 27 27 27 27 27 27 28 29 30 31 32 33 34 34 34-1 34-2 34-2 34-3 34-3 34-4 34-4 34-5 34-6 35 36 36 37 37 38 38 39 40 41 3 PCR-T500 4 PCR-T520 Code No.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 1 SE-S400_SR 2 SE-S400_BK N Item 55 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 3 PCR-T500 4 PCR-T520 5 SE-C450 6 SE-S3000 7 PCR-T2300 8 PCR-T2400 Code No.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 7-5.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 PARTS LIST 1 2 N DL-1336 DL-1846 Item Code No.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 7-6.
SE-S400/PCR-T500/PCR-T520/SE-C450/ SE-S3000/PCR-T2300/PCR-T2400/SE-C3500 PARTS LIST 1 2 3 4 5 N DL-2437 DL-2818 DL-2819 DL-2820 DL-2821 Item Code No.
CASIO COMPUTER CO., LTD.
