User Manual

Table Of Contents
EN-17
Digital Piano Operations
To adjust the depth of the hall simulator effect
1.
Perform step 1 under “To specify the Hall
Simulator type” to select a hall simulator
effect.
2.
While holding down 4 SOUND MODE, use
the keyboard keys below to adjust hall
simulator depth.
Effect depth can be set to a value in the range of 0 (no
effect) to 42 (maximum depth). As you use the
keyboard keys to change the setting, the reference
tone (page EN-10) will sound any time the value
becomes a multiple of 10 (10, 20, etc.)
3.
After the setting is the way you want, release
4 SOUND MODE.
To specify the Surround type
1.
While holding down 4 SOUND MODE, press
the F1 (Surround Type 1) or F{1 (Surround
Type 2) keyboard key.
2.
Release 4 SOUND MODE.
Pressing this key: Does this:
C{1 Lowers the effect depth applied to the
Digital Piano sound source one level.
D1 Raises the effect depth applied to the
Digital Piano sound source one level.
C{1 + D1 Returns the effect depth applied to the
Digital Piano sound source to the
initial default setting.
C1
A0
C2 C3 C4 C5 C6 C7
C8
D1
C{1
C1A0 C2 C3 C4 C5 C6 C7
C8
F{1F1