User Manual
Table Of Contents
- Cover
- Contents
- Overview and Setup
- Operations Common to All Modes
- Digital Piano Operations
- Listening to Demo Play
- Selecting a Tone
- Changing Keyboard Response to Touch Pressure (Touch Response)
- Changing the Pitch in Semitone Steps (Transpose)
- Fine Tuning a Pitch (Tuning)
- Changing the Pitch in Octave Units (Octave Shift)
- Using the Sound Mode Effects (Hall Simulator and Surround)
- Using Chorus
- Using Brilliance
- Adjusting Acoustic Piano Sound Characteristics (Acoustic Simulator)
- Using the Metronome
- Specifying the Tempo
- Splitting the Keyboard for Duet Play
- Changing the Scale Tuning (Temperament) of the Keyboard
- Listening to Songs (Music Library)
- Using the MIDI Recorder to Record or Playback Performances
- Using the Audio Recorder to Record Performances
- Listening to Songs (MIDI Player)
- USB Flash Drive
- Supported USB Flash Drives
- USB Flash Drive and USB Type A Port Handling Precautions
- Connecting a USB Flash Drive to and Detaching It from the Digital Piano
- Formatting a USB Flash Drive
- USB Flash Drive Operations
- Using a Computer to Copy General Song Data to a USB Flash Drive
- Storing Standard Audio Data (WAV Files) to a USB Flash Drive
- Configuring Settings
- Linking with a Smart Device (APP Function)
- Troubleshooting
- Reference
- MIDI Implementation Chart
EN-45
Configuring Settings
To change settings shown in the table below, hold down 3 FUNCTION as you press the indicated keyboard keys.
Other Settings
This setting:
Pressing
this key:
Does this:
Touch Button Luminosity
Toggles the touch button luminosity setting between 1 (dim) and
2 (bright).
D7 Toggles the setting between 1 and 2.
Touch Button Sensitivity
Specifies touch button sensitivity within the range of –1 (Low) to
0 (Standard) to +1 (High).
E}7 Lowers the touch button sensitivity setting
by 1.
E7 Raises the touch button sensitivity setting
by 1.
Speaker Out
When Auto is selected for this setting, no sound is output from the
Digital Piano speakers when something is plugged into the
9 PHONES jack (default). Regardless of whether something is
plugged into the 9 PHONES jack, enabling this setting causes sound
to be output from the speakers. Sound is not output from the speakers
when this setting is disabled.
F7 Cycles between off, on and auto.
Off: Off tone
On: Option tone × 1
Auto: Option tone × 2
Power On Alert
Enables or disables Power On Alert (page EN-7).
F{7 Toggles between enabled and disabled.
Panel Light Setting
To save power, you can configure a setting that will turn off all button
lights, except for 3 FUNCTION, after a certain period of non-
operation. You can specify a trigger time of 5, 30, 60, or 120 seconds.
You can also disable this setting, which means that lights will remain
on.
G7 See “To change the panel light setting”
(page EN-46).
Auto Resume
Enabling Auto Resume causes most settings to be saved while power
is turned off.*
1
A}7 Toggles between enabled and disabled.
Notification Tone Volume
The notification tone volume can be adjusted within the range of
0 (muted) to 10 (maximum).
A7 Lowers the notification tone volume by 1.
B}7 Raises the notification tone volume by 1.
A7 + B}7 Returns the notification tone volume to its
initial default setting.
Notification Tone Set Selection
Your Digital Piano lets you know the results of operations by sounding
notification tones. You can select from among three different notification
tone sets.
B7 Cycles the setting to the next notification
tone set (1, 2, 3).
C1
A0
C2 C3 C4 C5 C6 C7
C8
F7: Speaker Out disable/enable/Auto
F{7: Power On Alert
G7: Panel Light Setting
A}7: Auto Resume
A7: Notification Tone Volume (–)
B}7: Notification Tone Volume (+)
B7: Notification Tone Set Selection
C8: Panel Lock disable/enable/Auto
E7: Touch Button Sensitivity (+)
E}7: Touch Button Sensitivity (–)
D7: Touch Button Luminosity dim/bright