User Manual
Table Of Contents
- Cover
- Contents
- Overview and Setup
- Operations Common to All Modes
- Digital Piano Operations
- Listening to Demo Play
- Selecting a Tone
- Changing Keyboard Response to Touch Pressure (Touch Response)
- Changing the Pitch in Semitone Steps (Transpose)
- Fine Tuning a Pitch (Tuning)
- Changing the Pitch in Octave Units (Octave Shift)
- Using the Sound Mode Effects (Hall Simulator and Surround)
- Using Chorus
- Using Brilliance
- Adjusting Acoustic Piano Sound Characteristics (Acoustic Simulator)
- Using the Metronome
- Specifying the Tempo
- Splitting the Keyboard for Duet Play
- Changing the Scale Tuning (Temperament) of the Keyboard
- Listening to Songs (Music Library)
- Using the MIDI Recorder to Record or Playback Performances
- Using the Audio Recorder to Record Performances
- Listening to Songs (MIDI Player)
- USB Flash Drive
- Supported USB Flash Drives
- USB Flash Drive and USB Type A Port Handling Precautions
- Connecting a USB Flash Drive to and Detaching It from the Digital Piano
- Formatting a USB Flash Drive
- USB Flash Drive Operations
- Using a Computer to Copy General Song Data to a USB Flash Drive
- Storing Standard Audio Data (WAV Files) to a USB Flash Drive
- Configuring Settings
- Linking with a Smart Device (APP Function)
- Troubleshooting
- Reference
- MIDI Implementation Chart
EN-46
Configuring Settings
*1 The settings below are not retained even if Auto Resume is enabled.
Duet Mode setting, song playback part setting, Local Control, Panel Lock (on only)
*2 Pressing any key or pedal is interpreted as the start of a performance and causes operation to be locked.
■ To change the panel light setting
1.
Hold down 3 FUNCTION.
• Do not release 3 FUNCTION until step 3, below.
2.
Press the G7 keyboard key.
Each time the G7 keyboard key is pressed to change this setting, a notification tone sounds to indicate the newly selected
setting.
* For more information, see “Notification Tones” (page EN-10).
3.
After the setting is the way you want, release 3 FUNCTION.
• Turning on the Digital Piano under battery power only (without AC adaptor power) will cause the Panel Light Setting to change
automatically to 60 seconds to conserve power. You can change the Panel Light Setting if you want.
Panel Lock
While this setting is enabled, the LEDs of all touch buttons, except
3 FUNCTION, are turned off, and all operations are disabled at all
times, except for those below. While Auto is selected for this setting,
operations are disabled during performances only.*
2
• 1P (Power) button power operations. Turning off Digital Piano
power cancels panel lock.
• Touch button operation to cancel Panel Lock.
C8 Cycles between off, on and auto. Even
after selecting ON for this setting, you can
change the setting by holding down
3 FUNCTION and pressing the C8
keyboard key.
Off: Off tone
On: Option tone × 1
Auto: Option tone × 2
Notification Tone* Setting Description
Off tone Off Touch button lights remain lit.
Option tone × 1 5 seconds After non-operation of the front panel for the specified time, the lights
of all touch buttons, except for 3 FUNCTION, will turn off.
Option tone × 2 30 seconds
Option tone × 3 60 seconds
Option tone × 4 120 seconds
This setting:
Pressing
this key:
Does this: