User Manual
Table Of Contents
- Cover
- Contents
- Overview and Setup
- Operations Common to All Modes
- Digital Piano Operations
- Listening to Demo Play
- Selecting a Tone
- Changing Keyboard Response to Touch Pressure (Touch Response)
- Changing the Pitch in Semitone Steps (Transpose)
- Fine Tuning a Pitch (Tuning)
- Changing the Pitch in Octave Units (Octave Shift)
- Using the Sound Mode Effects (Hall Simulator and Surround)
- Using Chorus
- Using Brilliance
- Adjusting Acoustic Piano Sound Characteristics (Acoustic Simulator)
- Using the Metronome
- Specifying the Tempo
- Splitting the Keyboard for Duet Play
- Changing the Scale Tuning (Temperament) of the Keyboard
- Listening to Songs (Music Library)
- Using the MIDI Recorder to Record or Playback Performances
- Using the Audio Recorder to Record Performances
- Listening to Songs (MIDI Player)
- USB Flash Drive
- Supported USB Flash Drives
- USB Flash Drive and USB Type A Port Handling Precautions
- Connecting a USB Flash Drive to and Detaching It from the Digital Piano
- Formatting a USB Flash Drive
- USB Flash Drive Operations
- Using a Computer to Copy General Song Data to a USB Flash Drive
- Storing Standard Audio Data (WAV Files) to a USB Flash Drive
- Configuring Settings
- Linking with a Smart Device (APP Function)
- Troubleshooting
- Reference
- MIDI Implementation Chart
EN-47
Configuring Settings
You can use the procedure below to return the Digital Piano’s stored data and settings to their initial factory defaults any time you
want.
1.
Hold down 3 FUNCTION.
2.
Press the A0 keyboard key.
This enters factory reset standby and causes the 3 FUNCTION light to flash.
• Step 3 below will execute the initialization operation. If you want to cancel initialization at this point, release
3 FUNCTION.
3.
To execute initialization, press the C1 keyboard key.
This starts initialization.
4.
Release 3 FUNCTION.
• The initialization operations takes some time to complete. Wait until initialization is complete. All front panel touch button
lights (3 FUNCTION to 8 GRAND PIANO) light when initialization is complete.
Factory Reset (Initialization)
C1A0 C2 C3 C4 C5 C6 C7
C8
C1 A0