User manual - QV2400UX_2900UX_2

BASIC IMAGE RECORDING

E-58

Using the Infinity Mode

The Infinity Mode sets the focus near infinity. It is a good

choice for scenery and other far-off subjects. Focus adjust-

ment starts automatically whenever you press the shutter

release button about half way down.

Press / /MF RESIZE to cycle through the fo-

cus mode settings until the indicator ap-

pears on the display. This indicates the Infinity

Mode.

Compose the image and record it.

• See “Using the Auto Focus Mode” on page E-56 for

information about how the camera focuses an image

automatically.

• You can check the current status by looking at the op-

eration lamp and focus frame. See “Using the Auto

Focus Mode” on page E-56 for more information.

Using the Manual Focus Mode

With Manual Focus, you make the required focus settings by

hand. The following shows the relationship between optical

zoom factor and the focusing distance for the Manual Focus

Mode.

Press / /MF RESIZE to cycle through the fo-

cus mode settings until the indicator ap-

pears flashing on the display. This indicates

the Manual Focus Mode.

While the indicator is flashing, use [+] and

[–] to focus the image.

• If you do not perform any focus operation for about

three seconds, the indicator stops flashing.

• You can press / /MF RESIZE while the indica-

tor is on the monitor screen to change to another focus

mode, if you want.

Optical Zoom Factor

Focusing Distance

1cm to ∞

50cm to ∞

1cm to ∞

1m to ∞

QV-2400UX

QV-2900UX