User manual - QV2400UX_2900UX_2

OTHER RECORDING FUNCTIONS
E-85
Quick Metering Mode Selection
You can also use the following procedure to change the me-
tering mode, without going through the menu.
1. Enter the REC mode.
2. While holding down SHIFT INFO, press / /
MF RESIZE to cycle through the metering
mode icons on the monitor screen in the se-
quence shown below.
• (multi) (center) (spot)
Setting the Sensitivity Level
Use the following procedure to specify the sensitivity level.
1. Enter the REC mode.
2. Press MENU.
3. Select “FUNCTION” “Sensitivity”, and then
press the shutter release button.
4. Select the setting you want, and then press the
shutter release button.
If you want to set sensitivity at this level
ISO 80 equivalent
ISO 160 equivalent
ISO 320 equivalent
Select this
ISO 80
ISO 160
ISO 320