User Guide

OTHER RECORDING FUNCTIONS

E-94

Specifying Power On Default Settings

Configuring the camera’s “mode memory” controls power on

default settings. Turning a mode memory item on specifies

that the setting of the item when the camera is turned off

should be restored when the camera is turned back on

again. Turning a mode memory item off specifies that its fac-

tory default setting should be used whenever the camera is

turned on.

Align the POWER/Function Switch with REC.

Press MENU.

Select “FUNCTION” “Mode Memory”, and

then press SET/DISP.

Select the item whose mode memory status

you want to change, and then press SET/DISP.

Select the setting you want, and then press

SET/DISP.

IMPORTANT!

• The TIFF format image save operation takes more

time than the JPEG format save operation.

• Turning on the TIFF Mode causes both JPEG and

TIFF versions of the image to be saved. This causes

image files to be very large, and greatly reduces stor-

age capacity (page E-64).

● TIFF Format File Sizes

• Deleting the JPEG version of an image saved using

the TIFF Mode also causes the TIFF version to be de-

leted.

• You cannot delete the TIFF version of an image alone.

To delete the TIFF version, you must also delete the

JPEG version.

• TIFF images cannot be transferred to a computer us-

ing the Photo Loader application (page E-129) that

comes bundled with the camera.

• The Continuous Shutter Mode is disabled while the

TIFF Mode is turned on (page E-68).

Format

TIFF

File size

9MB

2.3MB

Image size (pixels)

2048 x 1536

1024 x 768