User's Guide

OTHER RECORDING FUNCTIONS
E-98
Specifying Contrast
Use this procedure to adjust the relative difference between
the light areas and dark areas of the image you are record-
ing.
1. Align the power/function switch with .
2. Press MENU.
3. Select “Contrast” and then rock the control
button to the right.
4. Select the setting you want, and then click the
control button to apply it.
To get this:
Maximum contrast
Relatively high contrast
Normal contrast
Relatively low contrast
Minimum contrast
Select this:
+2
+1
0
–1
–2
5. Press MENU to exit the setting procedure.
Specifying Outline Sharpness
Use the following procedure to control the sharpness of im-
age outlines.
1. Align the power/function switch with .
2. Press MENU.
3. Select “Sharpness” and then rock the control
button to the right.
4. Select the setting you want, and then click the
control button to apply it.
5. Press MENU to exit the setting procedure.
To get this:
Maximum sharpness
Relatively high sharpness
Normal sharpness
Relatively low sharpness
Minimum sharpness
Select this:
+2
+1
0
–1
–2