User's Guide

OTHER RECORDING FUNCTIONS
E-101
Specifying Power On Default Settings
Configuring the camera’s “mode memory” controls power on
default settings. Turning a mode memory item on specifies
that the current setting of the item when the camera is turned
off should be restored when the camera is turned back on
again. Turning a mode memory item off specifies that its fac-
tory default setting should be used whenever the camera is
turned on.
1. Align the power/function switch with .
2. Press MENU.
3. Select “Mode Memory” and then rock the con-
trol button to the right.
4. Select the item you want to change, and then
rock the control button to the right.
5. Select the setting you want, and then click the
control button to apply it.
To do this when the camera is turned on:
Restore the item’s last setting when
power was turned off
Restore the item’s factory default setting
Select this:
On
Off
6. Press MENU to exit the setting procedure.
● Mode Memory Items and Settings
Item
Flash
White Balance
Metering
Focus
Digital Zoom
EV Shift
Off (Initial Default)
Auto
Auto
Multi
Spot
On
None
On
Setting at power off.
Memory Mode Status
● Resetting Mode Memory
In step 4 of the above procedure, select “Reset” “Yes”
and then click the control button. This returns the mode
memory settings to their initial defaults.