User Guide

OTHER RECORDING FUNCTIONS
103
Using the Remote Shutter Release
You can use an optionally available remote shutter release
(WR-3C) to release the shutter without touching the camera.
By mounting the camera on a tripod and using the remote
shutter release, you can eliminate the chance of blurred im-
ages due to accidental hand movement. For full details, see
the instructions that come with the remote shutter release.
Supported Remote Shutter Release: WR-3C (option)
Cable Length: Approximately 1 meter (3.3˝)
1. Turn off the camera and connect the remote
shutter release to the camera’s DIGITAL port
(shutter release terminal).
2. Align the power/function switch with .
3. Press MENU.
4. Select “Release Setting” and then rock the
control button to the right.
5. Select “On” and then click the control button.
• Selecting “Off” disables the remote shutter release.
6. Press MENU to exit the setting procedure.
7. Now you can use the remote shutter release to
record an image.
NOTE
• The remote shutter release can perform the following
camera operations: shutter release button half and full
press, zoom controller operation, control button left or
right rock.
Remote shutter
release
DIGITAL