Specifications

— 17 —
4. TEST MODE
4-1. TEST MODE
(1) Turn POWER on while pressing MENU key and DISP button simultaneously.
(2) TEST MODE screen is displayed.
(3) When scratch compensation is NOT complete, WHITE NOISE DATA NO appears on the display.
(4) If scratch compensation is COMPLETE, WHITE NOISE DATA YES appears on it.
(5) At the lower right corner, Loader, ADJ and Program versions are displayed.
ADJ: When ADJ is broken, 2222222222 will be displayed.
When CCD is not adjusted, ’98 will not be displayed. (i.e. only 829 appears)
4-2. MENU1
(1) Press MENU button and FLASH button at the same time while in TEST MODE display.
(2) MENU1 is displayed.
1. INIT. SETTING NTSC
2. INIT. SETTING PAL
3. GRAY SCALE(10step)
4. BLACK
5. 50% GRAY
6. WHITE
7. CROSS HATCH
8. COLOR BAR
(3) Select using +/– button. Choose by pressing SHUTTER button.
1. MENU1-1, 2
Set at factory.
On confirmation screen SHUTTER will start the settings.
(Will not delete pictures in Flash memory)
2. MENU1-3
Displays 10 step of gray scale.
Light intensity values are 16, 38 60, 82, 104, 126, 148, 170, 192, 214, 235.
3. MENU1-4
Black display.
4. MENU1-5
50% gray display.
5. MENU1-6
White display
6. MENU1-7
32 × 32 pixel grid pattern on black, or RED square at REC Thru (320 × 216) or Yellow square
at PLAY MODE (360 × 240) or 1 PIXEL mark is displayed in the center.
7. MENU1-8
Display color bar.
TEST MODE
WHITE NOISE DATA YES (NO)
LOADER 2
ADJ. 98000829
VER. 98082901
Display