Specifications

— 18 —
4-3. MENU2
CAUTION : Do no execute operations of MENU2 other than noted in 3. Adjustment.
Program data maybe corrupted and will be unable to use.
(1) In TEST MODE display, double click AF key then MENU button and FLASH button at the same
time.
(2) MENU2 is displayed as shown below.
page 1
1. CCD ADJUST
2. BATT. TEST
3. REC INFO.
4. SELF COPY
5. CAMERA UPDATE
6. NO COMP CAPT
7. IR TEST MASTER
8. IR TEST SLAVE
page 2
9. CP2 JPEG TEST
10. WHITE NOISE DETECT
11. BAYER CAPTURE
(3) Select using +/– key. Confirm by pressing SHUTTER button.
1. MENU2-1
Execute CCD color solid adjustment, then record it on ADJ of EEPROM.
Press shutter button by adjusting the light amount using specified filters in specified viewer.
When setting mark is displayed, it is completed.
Set QV-7000SX to REC mode Rotary switch to Normal.
Hold back any other key operation.
2. MENU2-2
Battery life measurement function.
When SHUTTER button is pressed, it will shoot pictures intervally.
3. MENU2-3
Displays FOCUS/ iris/Shutter speed
4. MENU2-4
Connect QV-700SX with each other with cable and copy program codes. The camera operating
this menu will be the master camera, and by sending its ROM data it will update the receiving
camera’s 8 Mbyte FLASH MEMORY. Connect another QV-7000SX and turn on power, then
transmission will start.
5. MENU2-5
Overwrites camera program domain. It reads a file mane Rom.bin from CF, and writes its
binary image into the Flash memory 0X1000.
6. MENU2-6
Saves without compression. Disabled by turning power off.
7. MENU2-7,8
Test the IrDA communication. Master mode is sending 1 letter repeatedly and receiving the
same letter back .
Slave mode is sending back when the letter it received.
8. MENU2-9
Test CP2, JPEG. Keep the right data file of ref.bay, ref.y, ref.cb, ref.cr, refdec.y, refdec.cb,
refdec.cr, ref.jpg beforehand in CF.
9. MENU2-10
Detects CCD’s white scratch, and stores it in EEPROM. Set to Normal.
10. MENU2-11
Saves Bayer data from CCD as it is.