Specifications

— 20 —
CN160
CN150
CN580
CN800
9. Desolder the red wire which comes from the
switch unit.
12.Unscrew two screws (S1) fixing CAM case
and remove CN540 then take CAM case out.
8. Separate the upper case and lower case.
(Easy if from CAM case side.)
CN cover will be remored.
10.Remove CN150 (red wire, black wire) and
CN160 (black wire, red wire, orange wire)
11.Remove CN800 and CN580.
13. CAM case block, lower case block, upper
case block separated.
red wire
screw(S1)
CN540