Specifications

— 21 —
2. Lower case
1. Remove battery cover by turning it upward
to the right.
3. Open CF cover and make sure not to damage
the detect switch. By pressing the CF card
eject knob with a precision screw driver
remove D PCB ass’y.
2. Unscrew screws (S6) and CN510 on D PCB
ass’y
4. Lower case and D PCB ass’y separated.
7. Lower case and switch case separated.
5. Lower case and battery holder separated.
6. Unscrew one screw (S1) on switch unit.
8. Unscrew one screw (S7) on lower case.
screw(S1)
screw(S7)
CN510
screw(S6)