Specifications

— 24 —
4. CAM case
1. Remove two screws (S3) on CAM case.
2. Remove upper case by pressing the upper
part of CAM case ass’y
3. Unscrew one screw (S3) on L case ass’y.
4. Rotate L case ass’y and unscrew the other
screw (S3).
6. Remove three screws (S4) and desolder red
wire on CL unit.
5. Remove CN1, CN250, CN251.
7. Desolder black wire and orange wire on CL
unit.
8. Unscrew (S4) on sensor.
screw(S3)
screw(S3)
screw(S3)
CN1
CN251
CN250
black wire
orange wire
screw(S4)
screw(S4)
screw(S4)
red wire