Specifications

— 37 —

TROUBLESHOOTING

Trouble1 : Power turns off while in operation.

cause1

To prevent CF data error, the unit will automatically turn off when CF cover opens.

For product serial number 1022100 (program version 98082901) a shock to the camera (i.e. key

operation, lens rotation, etc.) may produce chattering to CF switch which may erroneously detect

that CF cover is open. To prevent this change the software.

Program to use (CF card × 1)

KX-778PROGRAM Ver. 100102

Action1 (Procedure to change software)

Note1: Use AC adaptor when changing program.

Note2: While TEST MODE is displayed, always follow the operations shown.

Others: For regular operations such as inserting or ejecting CF card, refer to owner’s manual.

(1) Error check

Insert the CF card that comes with the unit.

Turn power on, then tap the right side of the unit with finger. Make sure power turns off detecting

a shock. (Even if it dose not turn off, proceed to the next step.)

(2) Check program Ver.

Turn power on pressing DISP button and MENU key at the same time.

(TEST MODE appears on the screen.)

Only proceed when program Ver. 98082901 is displayed.

(3) To rewrite program

Insert a CF card then turn power on pressing DISP button and MENU button at the same time,

then it will automatically start to rewrite program.

The power will automatically turn off in 27 seconds.

LCD display

UPDATING CAMERA

WAIT . .

Program version

TEST MODE

WHITE NOISE DATA YES

LOADER 2

ADJ. 98000829

VER. 98082901

➝