User Manual

13
Getting Started
You can use either of the two following methods to charge the camera’s battery.
• USB-AC adaptor
• USB connection to a computer
. To charge with the USB-AC adaptor
The adaptor lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below (
1
,
2
,
3
,
4
).
Charging time: Approximately 160 minutes
IMPORTANT!
• Make sure that you insert the cable connector into the USB/
AV port until you feel it click securely into place. Failure to
insert the connector fully can result in poor communication or
malfunction.
• Note that even while the connector is fully inserted, you still
will be able to see the metal part of the connector as shown in
the illustration.
Charge the Battery
4
3
2
1
USB cable
(included with camera)
Making sure that the mark on the USB cable connector is towards
the LCD monitor side, connect the cable to the camera.
USB/AV port
USB-AC adaptor
Power cord