Operation Manual

109

OTHER RECORDING FUNCTIONS

Resetting the Camera

Use the following procedure to reset all of the camera’s

settings to their initial defaults as shown under “Menu

Reference” on page 194.

In the REC mode or the PLAY mode, press

[MENU].

Select the “Set Up” tab, select “Reset”, and

then press [].

Use [] and [] to select “Reset”, and then

press [SET].

• To cancel the procedure without resetting, select

“Cancel” and press [SET].

IMPORTANT!

• If you change the BESTSHOT mode sample scene

selection or if you turn off the camera while it is in the

BESTSHOT mode, the camera’s setup (except for

“REC mode” and “Zoom Position”) will be configured

according to the BESTSHOT sample scene settings

when you turn it back on again. This is true,

regardless of mode memory on/off settings.

• If you turn the camera off while in the Movie mode,

the flash will be turned off when you turn the camera

back on again, regardless of mode memory on/off

setting for the flash.