User manual

Cypher Technology Ltd 2008

4.13 Enable JPEG creation on Working Copies

This function will turn on the automatic creation of JPEG files on Working Copy disks.

This will slow down the creation of the Working Copy where RAW image files are

present.

Press the {Menu} soft key to enter the Menu system. The Up/down arrow keys are used

to select the desired function. Enable JPEGs is number 9 in the list of possible

functions. If it not already displayed, press [Up Arrow] or [Down Arrow] until “Enable

JPEGs” is shown in the display. Press the {Go} soft key to execute the function. Press

the {Change} soft key to toggle between enabling JPEG creation or disabling JPEG

creation.

Press the {Exit} soft key to return to the Menu and press {Exit} once more to return to

the Top Level.

4.14 Software Installation Procedure

This function installs new versions of the operating software. It is accessed from the

Menu as function 10. The procedure from a “cold” start is as follows:

1. Boot up Puma.

2. Press the {Menu} soft key to enter the menu.

3. Press the [Down Arrow] key until “10 Install Software” appears.

Either:

Press the [Disk] button to eject tray.

Place an upgrade disk on the tray and press [Disk] button once more to load the disk.

The disk will take a few seconds to be recognised. Please wait.

Or:

Plug in a USB drive to the rear panel of the Puma. This should have the install file and

the data files copied to the root directory of the drive as described in the download

instructions.

5. Press the {Go} soft key to start the software upgrade. The installation progress will be

shown on the screen. DO NOT SWITCH OFF DURING THIS PROCESS OR THE

SYSTEM MAY BE UNUSABLE.

6. When complete the system will display “Installation complete” or it will restart the new

version of the program.

7. Switch off and reboot.

8. Check the Version number (displayed at boot up) is the same as that labelled on the

Install CD or DVD.

4.15 Adjust the Internal Time and Date

This function allows the internal real-time clock to be adjusted. This clock is used to time

and date stamp the flash.img file on the Master disk.