User manual

Cypher Technology Ltd 2008

4.4 Menu System

When the system powers up, or after a full Transfer has completed, the display shows

11:32:15 Wed Nov 10 2008

Insert card... Menu>

or if a card is already inserted:

Card Size 3.89 GB

6 Files 69.2MB Menu>

Pressing the {Menu} soft key enters the Menu system.

The name of the current function is displayed on the top line of the display. The

Up/down arrow keys are used to select the desired menu function. The {Exit} soft key is

used to exit the Menu and return to the Top Level.

Possible operations are:

Menu Item Description

1 Make Working Creates Working Copy disk from Flash

2 Make Master Creates Master Copy

3 Verify Master Verifies card against Master Copy

4 Restore Master Creates clone Flash card from Master Copy

5 Wipe Card Overwrites Flash card with “0”s

6 Checksum Card Calculates checksum of card

7 Format Card Formats card as FAT32

8 Checksum Disk Calculates checksum of Image file on Master Copy

9 Enable JPEGs Allows Jpeg creation to be controlled

Press Up/Down Arrow keys to select Yes Or No

10 Install Software Install new software from DVD/CD

11 Adjust Time Adjusts Puma internal time and date

4.5 Make Working Copy

This function will copy all the files from the Flash card to the CD or DVD. This is a

Working Copy. It will also make JPEG copies of any RAW image files. The JPEG

creation can be enabled (see “Enable JPEGs” below).

Press the {Menu} soft key to enter the Menu system. The Up/down arrow keys are used

to select the desired function. Make Working Copy is at the top of the list of possible

functions. If it not already displayed, press [Up Arrow] until “Make Working” is shown in

the display. Insert a blank DVD or CD and press the [Go] soft key to execute the

function.

On successful completion the disk is ejected. Where the total size of the files is greater

than the disk size, Puma will prompt for further blank disks to be inserted as required.