Operation Manual

105
• If an error occurs during the send operation, the message “TRANSMIT
ERROR!” appears on the display. Press
ESC to clear the error message.
9. After the send operation is complete, the display returns to the Schedule
Keeper or Expense Mode screen.
To send all Calendar data in a specific period
1. Select the calendar month that starts the period you want to send.
2. Press
FUNC twice to display the second function menu.
3. Press
4 to select DATA COMM.
4. Press
1 to select SEND.
5. Press
2 to select MODE DATA.
6. Enter the year that ends the period of data you want to send and press
TIME/DATE.
7. Enter the month and press
TIME/DATE.
• If the month/year you enter comes before the month/year of the calendar
you selected in step 1, the starting and ending calendars are switched
automatically.
8. Press
SET to start the send operation or ESC to abort the operation without
sending anything.
• To abort the send operation at any time, press
ESC.
• If an error occurs during the send operation, the message “TRANSMIT
ERROR!” appears on the display. Press
ESC to clear the error message.
9. After the send operation is complete, the display returns to the calendar
selected in step 1 above.
Sending Data
Month selected in
step 1, above