Operation Manual

PART 3 Data Management Functions

In the case of the display on the right (data already stored), you can display the

“TIME?’’ prompt by pressing

CLEAR.

To input Schedule Keeper data

1. Press SCHEDULE to enter the Schedule Keeper, and enter a date as

instructed in “To specify a date”.

2. Press

CLEAR.

• You can skip this step.

3. Input the starting time of the appointment, pressing

TIME/DATE between

the hour and the minutes.

• If you are using the 12-hour timekeeping format, be sure to press

A to specify

AM or

P to specify PM when inputting time.

• To create a Schedule Keeper data entry with a description only (without

any start time or end time), press

NEXT (to advance directly to step 7) without

entering a time. You can press the J key in place of the

NEXT key.

4. Press

TIME/DATE again.

• To create a Schedule Keeper data entry with a start time and description only

(without any end time), press

NEXT (or J) (to advance directly to step 7)

instead of

TIME/DATE.

5. Input the ending time of the appointment, pressing

TIME/DATE between the

hour and the minutes.

6. Press

NEXT (or J).

7. Input a description of the appointment.

• If you want to set a schedule alarm, press

NEXT (or L) after inputting the

description. See “To set a schedule alarm when inputting data”.

8. After inputting the data, press

SET to store it into memory.

No data stored Data already stored

(Index Display)

Schedule Keeper

data entry