EN SP-100USNU User’s Guide 1
Safety Precautions Thank you for purchasing this CASIO product. Be sure to read the “Safety Precautions” before using this product to ensure that you use it correctly. Be sure to keep all user documentation handy for future reference. Danger Indicates something that creates the major risk of death or serious personal injury. k Button Type and Coin Type Battery Precautions Take care to ensure that a battery will not be swallowed accidentally.
Warning Indicates something that creates the risk of death or serious personal injury. k Display Screen Do not press the LCD or subject it to strong impact. Doing so can cause the LCD glass to crack, creating the risk of personal injury. Should the LCD become cracked, never touch any of the liquid inside. LCD liquid getting on the skin creates the risk of skin irritation. Should LCD liquid get into your mouth, immediately rinse your mouth out and contact your physician.
Caution Indicates something that creates the risk of minor personal injury or physical damage. Observe the precautions below. Failure to do so can cause a battery to rupture, creating the risk of fire, personal injury, and soiling of nearby objects by leaking fluid. • Do not try to take a battery apart and never allow a battery to become shorted. • Do not charge a non-rechargeable battery. • Do not expose a battery to heat or throw it into fire. • Use only the specified type of battery.
Important Precautions • If you suspect that the calculator is operating abnormally due to static electrical charge or some other problem, press A to restore normal operation. • Avoid dropping the calculator and otherwise subjecting it to severe impact. • Never try to take the calculator apart. • Never bend or twist the case. • Wipe the unit with a soft, dry cloth to clean it.
Contents Safety Precautions································································ 2 Important Precautions··························································· 5 Power Supply········································································· 5 Adjusting Contrast································································· 7 Nursing and Pharmacy Calculations····································· 8 Basic Calculations······························································· 22 Aut
Adjusting Contrast 1 Press A. 2 Long-press = for about four seconds to display the message below. “Set contrast OK[=] Nxt[+]” 3 Press =. 4 Use +(dark) and ,(light) to adjust. 5 Press A.
Nursing and Pharmacy Calculations k Nursing and pharmacy calculation keys Calculation 2 Calculation 1 You can perform the calculations below. A Calculation 1 BMI(lb) BMI, Ideal weight(lb) Calculation 2 BMI(kg) BMI, Ideal weight(kg) B Calculation 1 Dose(Des) Desired dose amount(mL) Calculation 2 Dose(Ord) Ordered dose amount(mg) C Calculation 1 BSA(lb) BSA(m2) Calculation 2 BSA(kg) BSA(m2) Calculation 1 eGFR(M) CCr (mL/min), eGFR(mL/min/1.
CCr: Creatinine Clearance IV rate: Infusion Volume drip rate k Switching Between Calculation 1 and Calculation 2 Each press of a nursing and pharmacy calculation key toggles between Calculation 1 and Calculation 2. Example: To switch between BMI (lb) and BMI (kg) 1 AB • This selects BMI (lb). BMI (lb) 2B • This selects BMI (kg).
k BMI (lb) Example: Male, “Height” = 5 feet 9 inches, “Weight” = 191 lbs Enter[=] BMI (lb) 1 AB If something else is displayed, press B again. 2= Male Female 1 2 3 1 (1: Male, 2: Female) Height? ft 4 5= Height? in 5 9= Weight? lb 6 191= BMI 7= Ideal weight 8= 10 28.2 lb 160.
k BMI (kg) Example: Female, “Height” = 165 cm, “Weight” = 67 kg Enter[=] BMI (kg) 1 ABB If something else is displayed, press B again. 2= Male Female 1 2 3 2 (1: Male, 2: Female) Height? cm 4 165= Weight? kg 5 67= BMI 6= Ideal weight 7= 11 24.6 kg 56.
k Dose (Des) Example: “Ordered dose amount” = 150 mg, “Quantity” = 1 mL, “Amount on hand” = 50 mg Enter[=] Ordered dose 1 Ar “Ordered dose Desired dose” (scroll) If something else is displayed, press r again. 2= Ordered dose amount? mg 3 150= Quantity? mL 4 1= Amount on hand? mg 5 50= Desired dose amount mL 3.
k Dose (Ord) Example: “Desired dose amount” = 3 mL, “Quantity” = 1 mL, “Amount on hand” = 50 mg Desired dose 1 Arr Enter[=] “Desired dose Ordered dose” (scroll) If something else is displayed, press r again. 2= Desired dose amount? mL 3 3= Quantity? mL 4 1= Amount on hand? mg 5 50= Ordered dose amount mg 150.00 6= k BSA (lb) Example: “Height” = 5 feet 3 inches, “Weight” = 163 lb BSA (lb) 1 As Enter[=] If something else is displayed, press s again.
k BSA (kg) Example: “Height” = 178.3 cm, “Weight” = 76.2kg BSA (kg) 1 Ass Enter[=] If something else is displayed, press s again. 2= Height? cm 3 178.3= Weight? kg 4 76.2= BSA m2 5= 14 1.
k eGFR (M) Example: Black male, “Age” = 35 years, “Weight” = 80 kg, “SCr” = 0.87 mg/dL eGFR (Male) 1 At Enter[=] Use this for male. If something else is displayed, press t again. 2= Black NonBlack 1222 3 1 (1: Black, 2: Non-black) Age? 4 35= Weight? 5 80= SCr? mg/dL 6 0.87= CCr mL/min 7= eGFR 8= 15 years kg 134.10 mL/min/1.73m2 130.
k eGFR (F) Example: White female, “Age” = 30 years, “Weight” = 68 kg, “SCr” = 0.74 mg/dL eGFR (Female) 1 Att Enter[=] Use this for female. If something else is displayed, press t again. 2= Black NonBlack 1222 3 2 (1: Black, 2: Non-black) Age? 4 30= Weight? 5 68= SCr? mg/dL 6 0.74= CCr mL/min 7= eGFR 8= 16 years kg 119.33 mL/min/1.73m2 109.
k IV rate Example: “Drop Factor” = 20 gtts/mL, “Total IV volume” = 500mL, “Time” = 480 minutes IV Drip Rate (I 1 Au Enter[=] “IV Drip Rate(Infusion Vol)” (scroll) If something else is displayed, press u again. 2= Drop Factor? 3 20= Total IV volume? mL 4 500= Time? min 5 480= Drops per min “Drops per minute” (scroll) 6= 17 gtts/mL gtts/min 21.
k Date This calculation lets you calculate the number of days (excluding the start date or end date) between dates. You can input dates for calculation within the range of January 1, 2000 to December 31, 2099. Example: To calculate the number of days from January 1, 2020 to May 5, 2025 Base date? 20yy mm dd [=] 1 Auu If something else is displayed, press u again. Base date? 20yy mm dd [=] 2 200101 2020-01-01 For the year, use the two rightmost digits of the Gregorian year.
Example: To calculate the date 100 days before January 1, 2020 Base date? 20yy mm dd [=] 1 Auu If something else is displayed, press u again. Base date? 20yy mm dd [=] 2 200101 2020-01-01 For the year, use the two rightmost digits of the Gregorian year. 3= Days bfr / aftr / prd 1 2 3 4 Press 1 to select “bfr” (before). Days before? [=] (2 selects “aftr” (after), 3 selects “prd” (period).
k Calculation Formulas Calculation 1 BMI=Weight(lb)÷(Height(in)+(Height(ft)× BMI(lb) Body Mass Index 12))2×703 Ideal weight (lb) Male: Ideal Body Weight(IBW: lb)=106+6× ((Height(in)+(Height(ft)×12))-60) Female: Ideal Body Weight(IBW: lb)=100+5 ×((Height(in)+(Height(ft)×12))-60) Calculation 2 BMI=Weight(kg)/(Height(m))2 BMI(kg) Body Mass Index Male: Ideal Body Weight(IBW: kg)=(106+6× Ideal weight (kg) (Height(m)×39.37-60))×0.4535924 Female: Ideal Body Weight(IBW: kg)=(100+ 5×(Height(m)×39.37-60))×0.
eGFR(M) Calculation 1 CCr(mL/min)=((140-Age)×Weight(kg))/ eGFR(CKD-EPI) (72×SCr(mg/dL)) (Male) eGFR(mL/min/1.73m2)=141×min(SCr/k,1)α ×max(SCr/k,1)-1.209×0.993Age ×1.159 [if Black] k=0.9 α=-0.411 Calculation 2 CCr(mL/min)=((140-Age)×Weight(kg)× eGFR(F) eGFR(CKD-EPI) 0.85)/(72×SCr(mg/dL)) (Female) eGFR(mL/min/1.73m2)=141×min(SCr/k,1)α ×max(SCr/k)-1.209×0.993Age×1.018 ×1.159 [if Black] k=0.7 α=-0.
Basic Calculations 6 ÷ 3 × 5 + 2.4 – 1 = 11.4 2 × (– 3) = – 6 A 0. 6/3*5+2.4,1= 11.4 2*3-= – 6. 23++12= 45= K K 35. & 68. & 7–5=2 2–5=–3 5,,7= 2= K K 2. ' – 3. ' 2 × 12 = 24 4 × 12 = 48 12**2= 4= K K 24. ( 48. ( 45 ÷ 9 = 5 72 ÷ 9 = 8 9//45= 72= K K 5. ) 8. ) 12 + 23 = 35 45 + 23 = 68 8 × 9 = 72 vv8*9N M 72. –) 5 × 6 = 30 5*6O M 30. 2 × 3 = 6 2*3N M 6. 48 v M 48. 2 + 3/ = 6 4 2+3C4= 6. 2 +/ 7 = –5 2+,7= – 5. 5+77L= 12.
Auto Power Off Function Auto power off: Approximately 6 minutes after last key operation • If the Auto Power Off function turns off power, press A to restore power. Replace Battery Icon The replace battery icon ( ) will appear on the left side of the display when battery power is low.
Initializing Memory Perform the steps below following battery replacement. 1 Press A. 2 Long-press = for about four seconds to display the message below. “Set contrast OK[=] Nxt[+]” 3 Press +=. This causes “Intl mem OK[=] Nxt[+]” to appear. To cancel initialization, press A here. 4 Press C= to initialize. • Next, you can perform the steps under “Adjusting Contrast” (page 7), if necessary.
Supplier’s Declaration of Conformity Model Name: SP-100USNU Responsible Party: Casio America Inc. Address: 570 Mt. Pleasant Avenue, Dover, New Jersey 07801, USA Telephone number: 973-361-5400 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan SA2112-A © 2022 CASIO COMPUTER CO., LTD.
